День добрый,

пользуюсь ботом давно и успешно, поэтому когда в очередной раз вернулся в игру, снова приобрёл лицензию.

Но тот случилось странное. Бот отказываетса работать. Фирст ран проходит уснешно, маркет експлорер тоже работает. Я заредил бот ордерами на покупку/продажу, настроил всё как написану тут в туториале и вклучил.
Бот стартует клиент, подгоняет как всегда окна, потом закрывает клиент, сновы его стартует, снова подгоняет окна, закрывает клиент и больше ничего не делает.

Что я попробывал:

- Переустановил бот
- Использывал стандартные настройки
- Выклучил все таймеры
- Подождал где-то час, чтобы проверить не блокируетса ли он каким-то таймером которого я в настройках не заметил

Увы, ничего не помогло.

Работает он у меня на ноутбуке с Виндой ХР. Как я уже говорил, 4 месяца назад работал, а сейчас вот не хочет.

Плеазе хелп

Для начала включи окно логгера и смотри, какую ошибку выдает. Обычно уже этого достаточно, чтобы понять причину - или чего-то не видит, или чего-то не включено и пролетает.
Если сам не осилишь - шли логи сюда, попробуем подсказать, или Славе - он точно разберется.
Только если сюда выложить соберешься - похерь из лога лог/пасс

вот лог после логина

после первого

12:39:43: StationSpaceCheck(060)

---> 12:39:44: ExitCode 2. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 300+
---> Desc: Returns 2 if station detected



12:39:44: AFKLogOffTimers(300)

12:39:44 (147) Timers switched off. Eve process exists. Code 1, Func : AFKLogOffTimers
---> 12:39:44: ExitCode 1. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 310+
---> Desc: Returns 1 if can continue (eve is on)



12:39:44: CustomDelay(310)

12:39:44 (147) New InStation Delay =0, Func : CustomDelay
12:39:44 (147) In Station delay switched off. Code 1, Func : CustomDelay
---> 12:39:45: ExitCode 1. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 400+
---> Desc: Returns 1 if can continue



12:39:45: CargoManager(400)

---> 12:39:45: ExitCode 4. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 450
---> Desc: Returns 4 - no loading/unloading tasks present



12:39:45: MarketAnalyzer(450)

12:39:45 (148) MarketAnalyzer switched off. Code 2, Func : MarketAnalyzer
---> 12:39:45: ExitCode 2. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 500+
---> Desc: Returns 2 if work done and can continue



12:39:45: Trader(500)

12:39:47 (150) market is closed. Opening..., Thread=Processor, Func : OpenWindow
12:39:49 (152) Window opened (market). Code 1, Func : OpenWindow
12:40:01 (164) Infobox detected. No orders text: {X=357; Y=380}, Func : ExportPersonalMarketOrders
12:40:04 (167) No orders to export text detected, Func : ExportPersonalMarketOrders
12:40:04 (167) No orders detected. Code 2, Func : Trader
---> 12:40:04: ExitCode 2. Method consumed 19 sec. in 1 runs (average 19 secs/run), Next Line: 540
---> Desc: Returns 2 if no orders left to work with



12:40:04: SellOrderInstaller(540)

12:40:05 (168) Current station: Jita IV - Moon 4 - Caldari Navy Assembly Plant (60003760), Func : SellOrderInstaller
12:40:10 (173) Infobox detected. No orders text: {X=357; Y=380}, Func : ExportPersonalMarketOrders
12:40:13 (176) No orders to export text detected, Func : ExportPersonalMarketOrders
12:40:17 (180) stationhangar is closed. Opening..., Thread=Processor, Func : OpenWindow
12:40:18 (181) cargohold is closed. Opening..., Thread=Processor, Func : OpenWindow
12:40:21 (184) Dragging window attempt 1, Top=182, Left=216, Bottom=632, Right=817, Func : SetupCargoManager
12:40:21 (184) Top Correction, Func : SetupCargoManager
12:40:24 (187) Bottom Correction, Func : SetupCargoManager
12:40:24 (187) Correction of the botton border is skipped as minimal height may be reached, Func : SetupCargoManager
12:40:24 (187) Left Correction, Func : SetupCargoManager
12:40:26 (189) Right Correction, Func : SetupCargoManager
12:40:29 (192) Dragging window attempt 2, Top=39, Left=377, Bottom=632, Right=674, Func : SetupCargoManager
12:40:29 (192) Bottom Correction, Func : SetupCargoManager
12:40:32 (195) Dragging window attempt 3, Top=39, Left=377, Bottom=252, Right=674, Func : SetupCargoManager
12:40:32 (195) Contracting Correction, Func : SetupCargoManager
12:40:34 (197) Finish. Code 1, Func : SetupCargoManager
12:40:35 (197) Window opened (cargohold). Code 1, Func : OpenWindow
12:40:36 (199) Finish. Code 1, Func : SetupCargoManager
12:40:37 (200) Opening New Window, Func : OpenAndSetupSecondCargoManager
12:40:43 (206) 1 window mode. Bottom correction FCM Data, Top=182, Bottom=632, Left=216, Right=817, Func : OpenAndSetupSecondCargoManager
12:40:47 (210) 1 window mode, top correctionFCM Data, Top=182, Bottom=512, Left=216, Right=817, Func : OpenAndSetupSecondCargoManager
12:40:50 (213) 2 window mode, left correction. SCM Data, Top=298, Bottom=512, Left=216, Right=817, Func : OpenAndSetupSecondCargoManager
12:40:53 (216) 2 window mode, right correctionSCM Data, Top=298, Bottom=512, Left=377, Right=817, Func : OpenAndSetupSecondCargoManager
12:40:57 (219) 2 window mode, contracting correction. SCM Data, Top=298, Bottom=512, Left=377, Right=674, Func : OpenAndSetupSecondCargoManager
12:41:01 (223) Window opened (stationhangar). Code 1, Func : OpenWindow
12:41:14 (237) Error during parsing line. Number of fields:7. Code false, Func : CheckInventory
12:41:14 (237) Error during checking inventory. Code false, Func : UpdateMarketCache
12:41:14 (237) Cache initialization failed. Code 0, Func : SellOrderInstaller
---> 12:41:14: ExitCode 0. Method consumed 69 sec. in 1 runs (average 69 secs/run), Next Line: 900+
---> Desc: Returns 0 if function generated error



12:41:14: ErrorHandler(900)

12:41:14 (237) PixelCoordMode: True, Func : ErrorHandler
12:41:14 (237) MouseCoordMode: True, Func : ErrorHandler
12:41:14 (237) ToolTipCoordMode: False, Func : ErrorHandler
12:41:14 (237) WinActivate success, Func : ErrorHandler
12:41:15 (238) Recorded screenshot:C:\Documents and Settings\Administrator\Local Settings\Application Data\MacroLab\Eve Pilot\ErrorHandler\ET-1-2015-12-30_12-41-14_ss_desktop.bmp, Func : ErrorHandler
12:41:15 (238) Recorded screenshot:C:\Documents and Settings\Administrator\Local Settings\Application Data\MacroLab\Eve Pilot\ErrorHandler\ET-1-2015-12-30_12-41-14_ss_client.bmp, Func : ErrorHandler
12:41:15 (238) Mouse removed to neocom bar, Func : ErrorHandler
12:41:17 (240) Station space check passed with res=2, Func : ErrorHandler
---> 12:41:17: ExitCode 1. Method consumed 2 sec. in 1 runs (average 2 secs/run), Next Line: 003+
---> Desc: Returns 1 if error not confirmed, go to station



12:41:17: CloseEveWindow(003)

12:41:17 (240) Thread: Processor, Func : CloseEveWindow
12:41:17 (240) Window Activation:1, Func : CloseEveWindow
12:41:17 (240) Closing eve window, handle:393736, Func : CloseEveWindow
---> 12:41:34: ExitCode 1. Method consumed 5 sec. in 1 runs (average 5 secs/run), Next Line: 005
---> Desc: Returns 1 if success



12:41:34: CustomDelay(005)

12:41:34 (257) New Restart Delay = 0 sec., Func : CustomDelay
12:41:34 (257) Relogin delay switched off. Code 1, Func : CustomDelay
---> 12:41:34: ExitCode 1. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 020
---> Desc: Returns 1 if can continue



12:41:34: CheckTraveling(020)

---> 12:41:35: ExitCode 0. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 030+
---> Desc: Return 0 if traveling OFF, or no systems in the list to travel to



после второго

12:43:19: StationSpaceCheck(060)

---> 12:43:20: ExitCode 2. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 300+
---> Desc: Returns 2 if station detected



12:43:20: AFKLogOffTimers(300)

12:43:20 (363) Timers switched off. Eve process exists. Code 1, Func : AFKLogOffTimers
---> 12:43:20: ExitCode 1. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 310+
---> Desc: Returns 1 if can continue (eve is on)



12:43:20: CustomDelay(310)

12:43:20 (363) New InStation Delay =0, Func : CustomDelay
12:43:20 (363) In Station delay switched off. Code 1, Func : CustomDelay
---> 12:43:20: ExitCode 1. Method consumed 0 sec. in 3 runs (average 0 secs/run), Next Line: 400+
---> Desc: Returns 1 if can continue



12:43:20: CargoManager(400)

---> 12:43:20: ExitCode 4. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 450
---> Desc: Returns 4 - no loading/unloading tasks present



12:43:20: MarketAnalyzer(450)

12:43:20 (363) MarketAnalyzer switched off. Code 2, Func : MarketAnalyzer
---> 12:43:20: ExitCode 2. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 500+
---> Desc: Returns 2 if work done and can continue



12:43:20: Trader(500)

12:43:20 (363) Minimal delay between order update is 30 minutes, Func : Trader
12:43:20 (363) Time is not appropriate to start updating orders. 1585 seconds left. Code 1, Func : Trader
---> 12:43:30: ExitCode 1. Method consumed 29 sec. in 2 runs (average 14 secs/run), Next Line: 540
---> Desc: Returns 1 if time is not appropriate to update orders yet (6 min interval after last run or by user defined delay)



12:43:30: SellOrderInstaller(540)

12:43:30 (373) Next time to update buy orders is 2087. Code 1, Func : SellOrderInstaller
---> 12:43:31: ExitCode 1. Method consumed 69 sec. in 2 runs (average 34 secs/run), Next Line: 550
---> Desc: Returns 1 if time is not appropriate to create orders yet



12:43:31: BuyOrderInstaller(550)

12:43:31 (374) Current station: Jita IV - Moon 4 - Caldari Navy Assembly Plant (60003760), Func : BuyOrderInstaller
12:43:32 (375) market is closed. Opening..., Thread=Processor, Func : OpenWindow
12:43:34 (377) Window opened (market). Code 1, Func : OpenWindow
12:43:46 (389) Infobox detected. No orders text: {X=357; Y=380}, Func : ExportPersonalMarketOrders
12:43:51 (394) No orders to export text detected, Func : ExportPersonalMarketOrders
12:43:56 (399) stationhangar is closed. Opening..., Thread=Processor, Func : OpenWindow
12:43:57 (399) cargohold is closed. Opening..., Thread=Processor, Func : OpenWindow
12:44:00 (403) Dragging window attempt 1, Top=182, Left=216, Bottom=632, Right=817, Func : SetupCargoManager
12:44:00 (403) Top Correction, Func : SetupCargoManager
12:44:03 (405) Bottom Correction, Func : SetupCargoManager
12:44:03 (405) Correction of the botton border is skipped as minimal height may be reached, Func : SetupCargoManager
12:44:03 (405) Left Correction, Func : SetupCargoManager
12:44:05 (408) Right Correction, Func : SetupCargoManager
12:44:08 (411) Dragging window attempt 2, Top=39, Left=377, Bottom=632, Right=674, Func : SetupCargoManager
12:44:08 (411) Bottom Correction, Func : SetupCargoManager
12:44:11 (414) Dragging window attempt 3, Top=39, Left=377, Bottom=252, Right=674, Func : SetupCargoManager
12:44:11 (414) Contracting Correction, Func : SetupCargoManager
12:44:13 (416) Finish. Code 1, Func : SetupCargoManager
12:44:13 (416) Window opened (cargohold). Code 1, Func : OpenWindow
12:44:15 (418) Finish. Code 1, Func : SetupCargoManager
12:44:16 (419) Opening New Window, Func : OpenAndSetupSecondCargoManager
12:44:22 (425) 1 window mode. Bottom correction FCM Data, Top=182, Bottom=632, Left=216, Right=817, Func : OpenAndSetupSecondCargoManager
12:44:26 (429) 1 window mode, top correctionFCM Data, Top=182, Bottom=512, Left=216, Right=817, Func : OpenAndSetupSecondCargoManager
12:44:30 (432) 2 window mode, left correction. SCM Data, Top=298, Bottom=512, Left=216, Right=817, Func : OpenAndSetupSecondCargoManager
12:44:33 (435) 2 window mode, right correctionSCM Data, Top=298, Bottom=512, Left=377, Right=817, Func : OpenAndSetupSecondCargoManager
12:44:36 (439) 2 window mode, contracting correction. SCM Data, Top=298, Bottom=512, Left=377, Right=674, Func : OpenAndSetupSecondCargoManager
12:44:40 (443) Window opened (stationhangar). Code 1, Func : OpenWindow
12:44:53 (456) Error during parsing line. Number of fields:7. Code false, Func : CheckInventory
12:44:53 (456) Error during checking inventory. Code false, Func : UpdateMarketCache
12:44:53 (456) Cache initialization failed. Code 0, Func : BuyOrderInstaller
---> 12:44:53: ExitCode 0. Method consumed 82 sec. in 1 runs (average 82 secs/run), Next Line: 900+
---> Desc: Returns 0 if function generated error



12:44:53: ErrorHandler(900)

12:44:53 (456) PixelCoordMode: True, Func : ErrorHandler
12:44:53 (456) MouseCoordMode: True, Func : ErrorHandler
12:44:53 (456) ToolTipCoordMode: False, Func : ErrorHandler
12:44:53 (456) ErrorHander was called less then hour ago, Func : ErrorHandler
12:44:53 (456) WinActivate success, Func : ErrorHandler
12:44:55 (457) Recorded screenshot:C:\Documents and Settings\Administrator\Local Settings\Application Data\MacroLab\Eve Pilot\ErrorHandler\ET-1-2015-12-30_12-44-53_ss_desktop.bmp, Func : ErrorHandler
12:44:55 (457) Recorded screenshot:C:\Documents and Settings\Administrator\Local Settings\Application Data\MacroLab\Eve Pilot\ErrorHandler\ET-1-2015-12-30_12-44-53_ss_client.bmp, Func : ErrorHandler
12:44:55 (457) Mouse removed to neocom bar, Func : ErrorHandler
12:44:56 (459) Station space check passed with res=2, Func : ErrorHandler
12:44:56 (459) Repeating errorhandler call. Code 0, Func : ErrorHandler
---> 12:44:56: ExitCode 0. Method consumed 5 sec. in 2 runs (average 2 secs/run), Next Line: 002+
---> Desc: Returns 0 if error confirmed and need to close eve



12:44:56: CloseEveWindow(002)

12:44:56 (459) Thread: Processor, Func : CloseEveWindow
12:44:56 (459) Window Activation:1, Func : CloseEveWindow
12:44:56 (459) Closing eve window, handle:655970, Func : CloseEveWindow
---> 12:45:14: ExitCode 1. Method consumed 10 sec. in 2 runs (average 5 secs/run), Next Line: 001
---> Desc: Returns 1 if success



12:45:14: StopClient(001)

12:45:14 (477) Thread: Processor, Func : CloseEveWindow
12:45:14 (477) Argument is IntPtr.Zero. Nothing to close atm., Func : CloseEveWindow
---> 12:45:19: ExitCode 0. Method consumed 4 sec. in 1 runs (average 4 secs/run), Next Line: 001
---> Desc: Always returns 0.

Я нифига не понял

Ну проблема с окном ангара станции. Судя по всему, он не может определить разделители колонок. Ты точно первый запуск переделывал? Разрешение не нестандартное? Хоткей открытия station hagar'а?
Возможно, скрины Error Handler'а что-нибудь прояснят.

Всё, работает.

Дело было разрешении. Сам комп был в нестандартном 1366х768, поскольку это ноут, но окно клиента открывалось в 1024х768. Поменял разрешение компа на 1024х768 и бот заработал. Думаю надо сделать первый запуск в этом разрешении и потом можно будет вернутса к старомы разрешению.

Спасибо за помощь.

Больше похоже на глюки с координатами, или с aspect ratio движений мыши, так что не удивляйся, если после обратного переключения в 1366*768 он опять откажется работать.