|
Hostile appears in local while ship is scrammed by rat. Bot doesn't try to kill scramming rat, only tries to warp to safe repeatedly, while drones are still shooting battleships. I had to manually intervene and kill the scramming rat.
Also, the priority to kill scramming rats doesn't work consistently. The boxes are ticked in NPC Spawn Selection. The bot only detects some scramming rats and kill them, but not all of them sometimes.
17:11:52: StopOperationHunter(430)
* local check (1792)
*** ENEMY DETECTED IN LOCAL=>EWO, res = 2, not in a group
17:11:52 (1791) Finish. Code 1, Func : SetupCargoManager
17:11:53 (1792) Neutrals in local:1. Code 2, Func : CheckLocal
---> 17:11:53: ExitCode 8. Method consumed 288 sec. in 518 runs (average 0 secs/run), Next Line: WO+
---> Desc: Method was cancelled due to emergency warp out activation
17:11:53: EmergencyWarpOut(WO)
---> 17:11:53: ExitCode 0. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 090+
---> Desc: Always returns 0
17:11:53: DockDrones(090)
17:11:53 (1792) Applying parameter: full version = true, Func : DockDrones
17:11:59 (1798) APPROACH line not detected - 6, Func : AlignOrApproachLineClick
17:11:59 (1798) Align line detected at {X=180,Y=239}, Func : AlignOrApproachLineClick
17:12:00 (1800) ScramblingNPCPresent, locked, Func : DockDrones
17:12:00 (1800) ScramblingNPCPresent, locked, Func : DockDrones
17:12:00 (1800) ScramblingNPCPresent, locked, Func : DockDrones
17:12:00 (1800) ScramblingNPCPresent, no delay, Func : DockDrones
---> 17:12:00: ExitCode 0. Method consumed 7 sec. in 1 runs (average 7 secs/run), Next Line: 060+
---> Desc: Always returns 0
17:12:00: WarpingToStation(060)
17:12:00 (1800) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:00 (1800) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:01 (1800) Warp not detected/finished. Color: 0x3E, ref: 0x30. Code 2, Func : WarpingSubStop
17:12:01 (1800) Using Station Bookmark, Func : WarpingToStation
17:12:02 (1801) Personal folder is expanded. Pers:{X=105; Y=160}, Agents:{X=105; Y=488}, Shared:{X=105; Y=248}, Func : BookmarkSetup
17:12:02 (1801) Personal subfolder is expanded, Func : BookmarkSetup
17:12:02 (1801) Max bookmarks: 2, Func : BookmarkSetup
17:12:02 (1801) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup
17:12:02 (1801) Bookmark Setup, green lines detected: 2, Func : BookmarkSetup
17:12:02 (1801) Using Anomalies Block, anomaly bookmark name is |1-anom|, Func : BookmarkSetup
17:12:02 (1801) StationBookmarkX =135, StationBookmarkY =200, Func : WarpingToStation
17:12:02 (1801) WarpClickAttempt = 0, Warping Start Time = 0, Func : WarpingToStation
17:12:04 (1803) Warp to line detected at {X=182,Y=221} - 139, Func : WarpLineClick
17:12:06 (1805) Warp line clicked. Attempt To Warp: 1. Code 2, Func : WarpingToStation
---> 17:12:06: ExitCode 2. Method consumed 10 sec. in 2 runs (average 5 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:06: WarpingToStation(060)
17:12:06 (1805) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:06 (1805) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:06 (1805) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:06: ExitCode 2. Method consumed 10 sec. in 3 runs (average 3 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:06: WarpingToStation(060)
17:12:07 (1806) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:07 (1806) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:07 (1806) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:07: ExitCode 2. Method consumed 11 sec. in 4 runs (average 2 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:07: WarpingToStation(060)
17:12:08 (1807) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:08 (1807) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:08 (1807) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:08: ExitCode 2. Method consumed 11 sec. in 5 runs (average 2 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:08: WarpingToStation(060)
17:12:09 (1808) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:09 (1808) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:09 (1808) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:09: ExitCode 2. Method consumed 12 sec. in 6 runs (average 2 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:09: WarpingToStation(060)
17:12:10 (1809) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:10 (1809) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:10 (1809) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:10: ExitCode 2. Method consumed 13 sec. in 7 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:10: WarpingToStation(060)
17:12:11 (1810) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:11 (1810) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:11 (1810) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:11: ExitCode 2. Method consumed 14 sec. in 8 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:11: WarpingToStation(060)
17:12:12 (1811) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:12 (1811) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:12 (1811) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:12: ExitCode 2. Method consumed 14 sec. in 9 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:12: WarpingToStation(060)
17:12:13 (1812) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:13 (1812) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:13 (1812) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:13: ExitCode 2. Method consumed 15 sec. in 10 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:13: WarpingToStation(060)
17:12:14 (1813) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:14 (1813) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:14 (1813) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:14: ExitCode 2. Method consumed 16 sec. in 11 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:14: WarpingToStation(060)
17:12:15 (1814) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:15 (1814) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:15 (1814) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:15: ExitCode 2. Method consumed 17 sec. in 12 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:15: WarpingToStation(060)
17:12:16 (1815) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:16 (1815) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:17 (1816) Warp not detected/finished. Color: 0x33, ref: 0x30. Code 2, Func : WarpingSubStop
17:12:17 (1816) Using Station Bookmark, Func : WarpingToStation
17:12:17 (1816) Personal folder is expanded. Pers:{X=105; Y=160}, Agents:{X=105; Y=488}, Shared:{X=105; Y=248}, Func : BookmarkSetup
17:12:17 (1816) Personal subfolder is expanded, Func : BookmarkSetup
17:12:17 (1816) Max bookmarks: 2, Func : BookmarkSetup
17:12:17 (1816) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup
17:12:17 (1816) Bookmark Setup, green lines detected: 2, Func : BookmarkSetup
17:12:17 (1816) Using Anomalies Block, anomaly bookmark name is |1-anom|, Func : BookmarkSetup
17:12:17 (1816) StationBookmarkX =135, StationBookmarkY =200, Func : WarpingToStation
17:12:17 (1816) WarpClickAttempt = 1, Warping Start Time = 0, Func : WarpingToStation
17:12:20 (1819) Warp to line detected at {X=182,Y=221} - 139, Func : WarpLineClick
17:12:21 (1820) Warp line clicked. Attempt To Warp: 2. Code 2, Func : WarpingToStation
---> 17:12:21: ExitCode 2. Method consumed 23 sec. in 13 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:21: WarpingToStation(060)
17:12:21 (1820) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:21 (1820) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:21 (1820) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:21: ExitCode 2. Method consumed 23 sec. in 14 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:21: WarpingToStation(060)
17:12:22 (1821) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:22 (1821) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:22 (1821) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:22: ExitCode 2. Method consumed 24 sec. in 15 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:22: WarpingToStation(060)
17:12:22 (1822) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:22 (1822) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:22 (1822) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:22: ExitCode 2. Method consumed 24 sec. in 16 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:22: WarpingToStation(060)
17:12:23 (1823) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:23 (1823) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:23 (1823) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:23: ExitCode 2. Method consumed 25 sec. in 17 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:24: WarpingToStation(060)
17:12:24 (1824) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:24 (1824) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:24 (1824) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:25: ExitCode 2. Method consumed 26 sec. in 18 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:25: WarpingToStation(060)
17:12:25 (1825) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:25 (1825) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:25 (1825) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:26: ExitCode 2. Method consumed 27 sec. in 19 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:26: WarpingToStation(060)
17:12:26 (1826) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:26 (1826) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:26 (1826) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:27: ExitCode 2. Method consumed 28 sec. in 20 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:27: WarpingToStation(060)
17:12:27 (1827) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:27 (1827) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:27 (1827) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:28: ExitCode 2. Method consumed 29 sec. in 21 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:28: WarpingToStation(060)
17:12:28 (1828) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:28 (1828) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:28 (1828) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:29: ExitCode 2. Method consumed 29 sec. in 22 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:29: WarpingToStation(060)
17:12:29 (1829) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:29 (1829) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:29 (1829) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:30: ExitCode 2. Method consumed 30 sec. in 23 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:30: WarpingToStation(060)
17:12:30 (1830) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:30 (1830) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:31 (1830) Warp not detected/finished. Color: 0x33, ref: 0x30. Code 2, Func : WarpingSubStop
17:12:31 (1830) Using Station Bookmark, Func : WarpingToStation
17:12:32 (1831) Personal folder is expanded. Pers:{X=105; Y=160}, Agents:{X=105; Y=488}, Shared:{X=105; Y=248}, Func : BookmarkSetup
17:12:32 (1831) Personal subfolder is expanded, Func : BookmarkSetup
17:12:32 (1831) Max bookmarks: 2, Func : BookmarkSetup
17:12:32 (1831) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup
17:12:32 (1831) Bookmark Setup, green lines detected: 2, Func : BookmarkSetup
17:12:32 (1831) Using Anomalies Block, anomaly bookmark name is |1-anom|, Func : BookmarkSetup
17:12:32 (1831) StationBookmarkX =135, StationBookmarkY =200, Func : WarpingToStation
17:12:32 (1831) WarpClickAttempt = 2, Warping Start Time = 0, Func : WarpingToStation
17:12:34 (1834) Warp to line detected at {X=182,Y=221} - 139, Func : WarpLineClick
17:12:36 (1835) Warp line clicked. Attempt To Warp: 3. Code 2, Func : WarpingToStation
---> 17:12:36: ExitCode 2. Method consumed 37 sec. in 24 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:36: WarpingToStation(060)
17:12:36 (1836) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:36 (1836) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:36 (1836) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:36: ExitCode 2. Method consumed 37 sec. in 25 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:36: WarpingToStation(060)
17:12:37 (1837) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:37 (1837) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:37 (1837) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:38: ExitCode 2. Method consumed 38 sec. in 26 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:38: WarpingToStation(060)
17:12:38 (1838) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:38 (1838) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:38 (1838) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:38: ExitCode 2. Method consumed 38 sec. in 27 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:38: WarpingToStation(060)
17:12:39 (1839) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:39 (1839) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:39 (1839) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:39: ExitCode 2. Method consumed 39 sec. in 28 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:39: WarpingToStation(060)
17:12:40 (1840) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:40 (1840) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:40 (1840) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:40: ExitCode 2. Method consumed 40 sec. in 29 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:40: WarpingToStation(060)
17:12:41 (1841) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:41 (1841) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:41 (1841) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:41: ExitCode 2. Method consumed 41 sec. in 30 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:41: WarpingToStation(060)
17:12:42 (1842) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:42 (1842) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:42 (1842) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:42: ExitCode 2. Method consumed 42 sec. in 31 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:42: WarpingToStation(060)
17:12:43 (1843) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:43 (1843) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:43 (1843) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:43: ExitCode 2. Method consumed 43 sec. in 32 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
17:12:43: WarpingToStation(060)
17:12:44 (1844) Applying parameter: use station bookmark is true, Func : WarpingToStation
17:12:44 (1844) Applying parameter: use warpdock false, Func : WarpingToStation
17:12:44 (1844) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation
---> 17:12:45: ExitCode 2. Method consumed 44 sec. in 33 runs (average 1 secs/run), Next Line: 060
---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success
|
Forums
