20:57:15 (665) StandingIcon8 is OK, C: 0x0, Tick: True, Func : CheckBoxTick 20:57:16 (666) Checking: StandingIcon9, Tick: False, XY:{X=411; Y=393}, Func : CheckBoxTick 20:57:16 (666) StandingIcon9 is OK, C: 0x80, Tick: False, Func : CheckBoxTick 20:57:17 (667) Checking: StandingIcon10, Tick: False, XY:{X=411; Y=413}, Func : CheckBoxTick 20:57:19 (668) StandingIcon10 is OK, C: 0x80, Tick: False, Func : CheckBoxTick 20:57:20 (669) Checking: StandingIcon11, Tick: True, XY:{X=411; Y=433}, Func : CheckBoxTick 20:57:20 (669) StandingIcon11 is OK, C: 0x0, Tick: True, Func : CheckBoxTick 20:57:21 (670) Checking: StandingIcon12, Tick: True, XY:{X=411; Y=453}, Func : CheckBoxTick 20:57:21 (670) StandingIcon12 is OK, C: 0x0, Tick: True, Func : CheckBoxTick 20:57:22 (671) Checking: StandingIcon13, Tick: True, XY:{X=411; Y=473}, Func : CheckBoxTick 20:57:22 (671) StandingIcon13 is OK, C: 0x0, Tick: True, Func : CheckBoxTick 20:57:23 (672) Checking: StandingIcon14, Tick: True, XY:{X=411; Y=493}, Func : CheckBoxTick 20:57:23 (672) StandingIcon14 is OK, C: 0x0, Tick: True, Func : CheckBoxTick 20:57:24 (673) Checking: StandingIcon15, Tick: False, XY:{X=411; Y=513}, Func : CheckBoxTick 20:57:24 (673) StandingIcon15 is OK, C: 0x80, Tick: False, Func : CheckBoxTick 20:57:25 (674) Checking: StandingIcon16, Tick: False, XY:{X=411; Y=533}, Func : CheckBoxTick 20:57:25 (675) StandingIcon16 is OK, C: 0x80, Tick: False, Func : CheckBoxTick 20:57:26 (676) Checking: StandingIcon17, Tick: False, XY:{X=411; Y=553}, Func : CheckBoxTick 20:57:27 (677) StandingIcon17 is OK, C: 0x80, Tick: False, Func : CheckBoxTick 20:57:28 (678) Checking: StandingIcon18, Tick: True, XY:{X=411; Y=573}, Func : CheckBoxTick 20:57:28 (678) StandingIcon18 is OK, C: 0x0, Tick: True, Func : CheckBoxTick 20:57:29 (679) Checking: StandingIcon19, Tick: True, XY:{X=411; Y=593}, Func : CheckBoxTick 20:57:31 (680) StandingIcon19 is OK, C: 0x0, Tick: True, Func : CheckBoxTick 20:57:32 (681) Checking: StandingIcon20, Tick: False, XY:{X=411; Y=613}, Func : CheckBoxTick 20:57:33 (682) StandingIcon20 is OK, C: 0x80, Tick: False, Func : CheckBoxTick 20:57:37 (686) Overview activated before drag attempt, Func : SetupOverview 20:57:37 (686) Found position of the overview bottom border = 433, Func : SetupOverview 20:57:37 (686) Dragging bottom overview border, searchX=765, overviewBottomBorderY=433, Func : SetupOverview 20:57:39 (688) Dragging bottom overview border, Func : SetupOverview 20:57:39 (689) Found position of the overview bottom border = 473, Func : SetupOverview 20:57:39 (689) Left overview border correction, Func : SetupOverview 20:57:39 (689) Left correction is required, OX=771, Diff=760>684, Func : SetupOverview 20:57:42 (691) Top overview border correction, Func : SetupOverview 20:57:42 (691) Top correction is required, OY=144<157, Func : SetupOverview 20:57:45 (695) Top Selected Item Window Correction, Func : SetupOverview 20:57:45 (695) Top Selected Item correction is required, SIY=46>157, Func : SetupOverview 20:57:47 (697) End of overview and selected item window reposition, Func : SetupOverview 20:57:48 (697) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-OverviewAndSelectedItemWindowRepositionEnd-2013-09-19_20-57-47.bmp, Func : SetupOverview 20:57:55 (704) DistanceColumnStart.X=704, DistanceColumnEnd.X=784, SizeColumnStart.X=784, SizeColumnEnd.X=864, NameColumnStart.X=864, NameColumnEnd.X=944, DistanceWidth=80, SizeColumnWidth=80, NameColumnWidth=80, Func : SetupOverview 20:57:56 (705) Distance Column Resize, Func : SetupOverview 20:57:56 (706) DistanceColumnStart.X=704, DistanceColumnEnd.X=794, SizeColumnStart.X=794, SizeColumnEnd.X=874, NameColumnStart.X=874, NameColumnEnd.X=954, DistanceWidth=90, SizeColumnWidth=80, NameColumnWidth=80, Func : SetupOverview 20:57:58 (707) Size Column Resize, Func : SetupOverview 20:57:58 (707) DistanceColumnStart.X=704, DistanceColumnEnd.X=794, SizeColumnStart.X=794, SizeColumnEnd.X=859, NameColumnStart.X=859, NameColumnEnd.X=939, DistanceWidth=90, SizeColumnWidth=65, NameColumnWidth=80, Func : SetupOverview 20:58:00 (709) Name Column Resize, Func : SetupOverview 20:58:00 (709) DistanceColumnStart.X=704, DistanceColumnEnd.X=794, SizeColumnStart.X=794, SizeColumnEnd.X=859, NameColumnStart.X=859, NameColumnEnd.X=999, DistanceWidth=90, SizeColumnWidth=65, NameColumnWidth=140, Func : SetupOverview 20:58:03 (713) Overview detected, distances OK. Code 1, Func : SetupOverview 20:58:03 (713) Orbitting disabled or has default orbitting range 1000m. Code 1, Func : SetupOrbitRange 20:58:06 (716) Dragging window attempt 1, Top=189, Left=220, Bottom=639, Right=820, Func : SetupCargoManager 20:58:06 (716) Top Correction, Func : SetupCargoManager 20:58:08 (717) Bottom Correction, Func : SetupCargoManager 20:58:09 (719) Left Correction, Func : SetupCargoManager 20:58:11 (720) Right Correction, Func : SetupCargoManager 20:58:12 (721) Dragging window attempt 2, Top=46, Left=382, Bottom=259, Right=677, Func : SetupCargoManager 20:58:12 (721) Contracting Correction, Func : SetupCargoManager 20:58:13 (723) Finish. Code 1, Func : SetupCargoManager 20:58:13 (723) Undock start time have been set - 723, Func : UndockSub 20:58:14 (724) Finish. Code 1, Func : SetupCargoManager 20:58:15 (724) Station space check returned 3, undocking not necessary, Func : UndockSub 20:58:15 (724) Stop ship command then Code 2, Func : UndockSub 20:58:34 (743) Pnp open hotkey, Func : FirstRun 20:58:36 (745) Pnp open hotkey - end, Func : FirstRun 20:58:36 (745) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 20:58:37 (746) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 20:58:37 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 20:58:37 (746) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 20:58:37 1 9999999990 1234567890 209........XX 210.......XXX 211.....XXXXX 212.....XXX.. 213.....XXX.X 214.....XX..X 215...XXX.XX. 216...XXXX... 217...XXX.... 218.......... 20:58:37 (746) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 20:58:37 (746) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 20:58:37 (746) Bookmark Setup: detected empty 2line. Calc finished, detected bookmarks: 1, subfolders: 1, Func : BookmarkSetup 20:58:37 (746) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 20:58:37 (746) Warp not detected/finished. Code 2, Func : WarpingSubStop 20:58:37 (746) Using Station Bookmark, Func : WarpingToStation 20:58:37 (746) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 20:58:38 (747) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 20:58:38 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 20:58:38 (747) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 20:58:38 1 9999999990 1234567890 209........XX 210.......XXX 211.....XXXXX 212.....XXX.. 213.....XXX.X 214.....XX..X 215...XXX.XX. 216...XXXX... 217...XXX.... 218.......... 20:58:38 (747) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 20:58:38 (747) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 20:58:38 (747) Bookmark Setup: detected empty 2line. Calc finished, detected bookmarks: 1, subfolders: 1, Func : BookmarkSetup 20:58:38 (747) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 20:58:38 (747) StationBookmarkX =121, StationBookmarkY =215, Func : WarpingToStation 20:58:38 (747) WarpClickAttempt = 0, Warping Start Time = 0, Func : WarpingToStation 20:58:40 (749) WARP TO line not detected, Func : DockOrWarpLineClick 20:58:40 (749) APPROACH line detected, Func : DockOrWarpLineClick 20:58:41 (750) DockOrWarpLineClick returned already in warp location. Code 3, Func : WarpingToStation 20:58:43 (752) Region: Station Space Check, Func : DockingToStation 20:58:43 (752) Warp not detected/finished. Code 2, Func : WarpingSubStop 20:58:43 (752) Region: Preset Check and Correction, Func : DockingToStation 20:58:46 (756) Region: Sorting Order Update And Selected Item Window Check, Func : DockingToStation 20:58:47 (756) Region: Overview Scan, Func : DockingToStation 20:58:47 (756) Region: First line check, Func : DockingToStation 20:58:47 (756) Region: Calculation position of a line to dock. UseAssemblyArray: False, Func : DockingToStation 20:58:47 (756) Position of a line to dock is 1, Func : DockingToStation 20:58:47 (756) Region: Warping Check, Func : DockingToStation 20:58:47 (756) Region: Approach Condition, docking line = 1, Func : DockingToStation 20:58:47 (756) Region: Final Dock And Exit, Func : DockingToStation 20:58:47 (756) Docking skipped because Player Owned Structure (Hangar or Assembly Array) detected. Code 3, Func : DockingToStation 20:58:52 (761) Finish. Code 1, Func : SetupCargoManager 20:58:52 (761) Opening New Window, Func : OpenAndSetupSecondCargoManager 20:58:55 (764) 1 window mode. Bottom correction FCM Data, Top=189, Bottom=639, Left=220, Right=820, Func : OpenAndSetupSecondCargoManager 20:58:57 (766) 1 window mode, top correctionFCM Data, Top=189, Bottom=519, Left=220, Right=820, Func : OpenAndSetupSecondCargoManager 20:58:59 (768) 2 window mode, left correction. SCM Data, Top=305, Bottom=519, Left=220, Right=820, Func : OpenAndSetupSecondCargoManager 20:59:00 (770) 2 window mode, right correctionSCM Data, Top=305, Bottom=519, Left=382, Right=820, Func : OpenAndSetupSecondCargoManager 20:59:02 (771) 2 window mode, contracting correction. SCM Data, Top=305, Bottom=519, Left=382, Right=677, Func : OpenAndSetupSecondCargoManager 20:59:04 (773) Serial: 07E3-50E3-6832-8606-7EB6-60FD, Func : FirstRun 20:59:04 (773) Thread: Processor, Func : CloseEveWindow 20:59:04 (773) Window Activation:1, Func : CloseEveWindow 20:59:04 (773) Closing eve window, handle:461692, Func : CloseEveWindow 20:59:24 (793) Settings validates. Code 1, Func : SaveGameSettings 20:59:24 (793) Settings were made successfully. Code 1, Func : FirstRun 21:01:47: Goto(000) ---> 21:01:48: ExitCode 0. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 010 ---> Desc: Always returns 0. Define the next label to go. 21:01:48: StartEveAndLogin(010) 21:01:48 (793) TimeRange check (local time): now 21:01:48, DTstart 14:50:00, DTstop 15:33:42, Func : DownTimeCheck 21:01:48 (793) TimeRange check (UTC): now 17:01:48, DTstart 10:50:00, DTStop 11:33:42, Func : DownTimeCheck 21:01:48 (793) New randomization interval = 349, Func : DownTimeCheck 21:01:48 (793) DownTime not detected. Code 0, Func : DownTimeCheck 21:01:48 (794) Timers switched off. Eve process not defined. Code 2, Func : AFKLogOffTimers 21:01:48 (794) Restart label. Using 6.3.13.0 version, Func : StartEVEAndLogin 21:01:48 (794) System: Microsoft Windows 7 Ultimate , Func : StartEVEAndLogin 21:01:48 (794) Theme Settings: SM_CYSIZE = 21, SM_CXFRAME = 8, SM_CYFRAME = 8, Func : StartEVEAndLogin 21:01:48 (794) Screen Resolution: 1366x768, Func : StartEVEAndLogin 21:01:48 (794) Video Card: Intel(R) HD Graphics, Registry Intel(R) HD Graphics, Func : StartEVEAndLogin 21:01:48 (794) Make sure you are using latest version before submitting log file, Func : StartEVEAndLogin 21:01:48 (794) Settings directory cleared, Func : StartEVEAndLogin 21:01:48 (794) Starting eve, Func : StartEVEAndLogin 21:01:48 (794) Path B, Func : StartEVEAndLogin 21:01:48 (794) Settings validated: True, Func : StartEVEAndLogin 21:01:48 (794) Path C, Func : StartEVEAndLogin 21:01:50 (796) Eve processes before start = 0; SendMode 0, Func : EVELauncher 21:01:50 (796) Windows: Microsoft Windows NT 6.1.7601 Service Pack 1, Counting windows before start. Counter = 247, Func : EVELauncher 21:01:50 (796) Starting eve: d:\games\eve on line\bin\exefile.exe; Server=Tranquility, Func : EVELauncher 21:01:50 (796) EVE process started, Func : EVELauncher 21:01:55 (801) Waiting for eve window, timer = 1, Func : EVELauncher 21:01:55 (801) exefile processes count: 2, Func : EVELauncher 21:01:55 (801) Name: exefile, ID: 7128, Func : EVELauncher 21:01:55 (801) Name: exefile, ID: 7128, Func : EVELauncher 21:01:55 (801) Title detected: EVE, handle=2556668, desktop=65552, procName=exefile, Func : EVELauncher 21:01:55 (801) Process is waiting for user input, Func : EVELauncher 21:02:01 (807) EVE: T=-15, B=791, L=171, R=1211, H=806, W=1040, dX=4, dY=7, C-mode=Relative, Func : StartEVEAndLogin Pattern: 21:02:02, bg1=0x30, c=R 44444455555555555555555555555555555555555555555555 99999900000000001111111111222222222233333333334444 45678901234567890123456789012345678901234567890123 754.................................................. 755.........XXX...............................X...... 756........X..XX..............................X...... 757........X.....XXXX..XXXX..XXXX..XXXX..XXXXXXXX.... 758........X.....X..X..X..X..X..X..X..X..X....X...... 759........X.....X..X..X..X..X..X..X..X..X....X...... 760........X.....X..X..X..X..X..X..XXXX..X....X...... 761........X..XX.X..X..X..X..X..X..X.....X....X...... 762.........XXX..XXXX..X..X..X..X..XXXX..XXXX.XXX.... 763.................................................. 764.................................................. 765.................................................. 21:02:04 (810) Server status detection call. Current locks: bitmaplock is False, processes lock is False, Func : StartEVEAndLogin 21:02:07 (813) searchX=584, searchY=703, X-offset=4, Y-offset=7, Func : ServerStatus 21:02:08 (814) a) Server line detected, Func : ServerStatus Pattern: 21:02:08, bg1=0x30, c=B 5555555555555555666666666666666666666666666666666666666666666666666666666666666666666666666666666666 8888889999999999000000000011111111112222222222333333333344444444445555555555666666666677777777778888 4567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123 703.................................................................................................... 704.................................................................................................... 705.................................................................................................... 706....XXX...................................XXXXX.............................X..X..X..X.............. 707...X...X....................................X..................................X.....X.............. 708...X......XXXX..XXXX..XX.XXXX..XXXX.........X...XXXX.XXX..XXXX..XXXX..X..X..X..X..X.XXXX.X..X....... 709...XXX....X..X..X..XX.X..X..X..X...X........X...X......X..X..X..X..X..X..X..X..X..X..X...X..X....... 710.....XXX..X..X..X...X.X..X..X..X............X...X...XXXX..X..X..X..X..X..X..X..X..X..X...X..X....... 711.......X..XXXX..X...XXX..XXXX..X............X...X...X..X..X..X..X..X..X..X..X..X..X..X...X..X....... 712...X...X..X.....X...XXX..X.....X............X...X...X..X..X..X..X..X..X..X..X..X..X..X...X..X....... 713....XXX...XXXX..X....X...XXXX..X...X........X...X...XXXX..X..X..XXXX..XXXX..X..XX.X..XXX.XXXX....... 714...................................................................X........................X....... 715...................................................................X.....................XXXX....... 716.................................................................................................... 717.................................................................................................... 718.................................................................................................... 719....XXX...X.........X........................XXX...X..XX............................................ 720...X...X..X.........X.......................X...X..X..X............................................. 721...X.....XXXX..XXX.XXXX.X..X..XXXX..........X...X..X.X.............................................. 722...XXX....X......X..X...X..X..X.....X.......X...X..XXX.............................................. 723.....XXX..X...XXXX..X...X..X..XXX...........X...X..XXX.............................................. 724.......X..X...X..X..X...X..X....XX..........X...X..X.XX............................................. 725...X...X..X...X..X..X...X..X..X..X..........X...X..X..X............................................. 726....XXX...XXX.XXXX..XXX.XXXX..XXXX..X........XXX...X...X............................................ 727.................................................................................................... 728.................................................................................................... 729.................................................................................................... 730.................................................................................................... 731.................................................................................................... 732....XXX....X......XXXXX..XXX...XXX.......XXXX..X.................................................... 733...X...X...X......X.....X...X.X...X......X...X.X.................................................... 734.......X..X.......X.....X...X.X...X......X...X.X...XXX..X..X..XXXX..XXXXXXXX........................ 735......XX..X.......XXXX..XX.XX.XX.XX......X...X.X.....X..X..X..X..X..X...X........................... 736.....XX..XX.X.........X..XXX...XXX.......XXXX..X..XXXX..X..X..X..X..X...XXX......................... 21:02:08 (814) Status: Server status is OK. Code 1, Func : ServerStatus 21:02:08 (814) Activation of eve window hwid= 2556668, Func : StartEVEAndLogin 21:02:08 (814) Entering login info, mouse coordmode is True; where true is relative, Func : StartEVEAndLogin 21:02:13 (819) Waiting for character selection screen, Func : StartEVEAndLogin 21:02:15 (821) Waiting For Character Selection Screen - main loop., Func : StartEVEAndLogin 21:02:16 (822) Waiting for character selection screen, timeout in 297seconds, Func : StartEVEAndLogin 21:02:16 (822) Connect button present, if you cannot pass through this stage for a long time, set windows theme as windows classic, Func : StartEVEAndLogin 21:02:16 (822) Character selection count = 1, Func : StartEVEAndLogin 21:02:24 (830) Waiting For Character Selection Screen - main loop., Func : StartEVEAndLogin 21:02:25 (831) Waiting for character selection screen, timeout in 288seconds, Func : StartEVEAndLogin 21:02:27 (833) Enter Game Text Found {X=643; Y=758}, Func : StartEVEAndLogin 21:02:27 (833) Character window detected, Func : StartEVEAndLogin 21:02:27 (833) Loading game, Func : StartEVEAndLogin 21:02:27 (833) Enter the game button click, Func : StartEVEAndLogin 21:02:30 (835) Station space check result = 1, Func : StartEVEAndLogin 21:02:32 (838) Station space check result = 1, Func : StartEVEAndLogin 21:02:35 (841) Station space check result = 3, Func : StartEVEAndLogin 21:02:43 (849) Game loaded, Func : StartEVEAndLogin 21:02:43 (849) Finish, Func : StartEVEAndLogin ---> 21:02:44: ExitCode 2. Method consumed 55 sec. in 1 runs (average 55 secs/run), Next Line: 050+ ---> Desc: Returns 2 if success there was no DT 21:02:44: BookmarkSetup(050) 21:02:44 (850) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:02:50 (856) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:02:50 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:02:50 (856) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:02:50 1 9999999990 1234567890 209........XX 210.......XXX 211.....XXXXX 212.....XXX.. 213.....XXX.X 214.....XX..X 215...XXX.XX. 216...XXXX... 217...XXX.... 218.......... 21:02:50 (856) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:02:50 (856) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:02:50 (856) Bookmark Setup: detected empty 2line. Calc finished, detected bookmarks: 1, subfolders: 1, Func : BookmarkSetup 21:02:50 (856) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup ---> 21:02:50: ExitCode 1. Method consumed 5 sec. in 1 runs (average 5 secs/run), Next Line: 060+ ---> Desc: Returns 1 if success 21:02:50: WarpingToStation(060) 21:02:50 (856) Warp in progress. Code 1, Func : WarpingSubStop 21:02:51 (856) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:51: ExitCode 2. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:51: WarpingToStation(060) 21:02:51 (857) Warp in progress. Code 1, Func : WarpingSubStop 21:02:51 (857) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:52: ExitCode 2. Method consumed 1 sec. in 2 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:52: WarpingToStation(060) 21:02:52 (858) Warp in progress. Code 1, Func : WarpingSubStop 21:02:52 (858) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:53: ExitCode 2. Method consumed 1 sec. in 3 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:53: WarpingToStation(060) 21:02:53 (859) Warp in progress. Code 1, Func : WarpingSubStop 21:02:53 (859) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:54: ExitCode 2. Method consumed 2 sec. in 4 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:54: WarpingToStation(060) 21:02:54 (860) Warp in progress. Code 1, Func : WarpingSubStop 21:02:54 (860) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:55: ExitCode 2. Method consumed 3 sec. in 5 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:55: WarpingToStation(060) 21:02:55 (861) Warp in progress. Code 1, Func : WarpingSubStop 21:02:55 (861) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:56: ExitCode 2. Method consumed 4 sec. in 6 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:56: WarpingToStation(060) 21:02:56 (862) Warp in progress. Code 1, Func : WarpingSubStop 21:02:56 (862) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:57: ExitCode 2. Method consumed 5 sec. in 7 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:57: WarpingToStation(060) 21:02:57 (863) Warp in progress. Code 1, Func : WarpingSubStop 21:02:57 (863) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:58: ExitCode 2. Method consumed 6 sec. in 8 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:58: WarpingToStation(060) 21:02:58 (864) Warp in progress. Code 1, Func : WarpingSubStop 21:02:59 (864) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:02:59: ExitCode 2. Method consumed 6 sec. in 9 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:02:59: WarpingToStation(060) 21:02:59 (865) Warp in progress. Code 1, Func : WarpingSubStop 21:02:59 (865) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:03:00: ExitCode 2. Method consumed 7 sec. in 10 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:00: WarpingToStation(060) 21:03:00 (866) Warp in progress. Code 1, Func : WarpingSubStop 21:03:00 (866) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:03:01: ExitCode 2. Method consumed 8 sec. in 11 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:01: WarpingToStation(060) 21:03:01 (867) Warp in progress. Code 1, Func : WarpingSubStop 21:03:01 (867) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:03:02: ExitCode 2. Method consumed 9 sec. in 12 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:02: WarpingToStation(060) 21:03:02 (868) Warp in progress. Code 1, Func : WarpingSubStop 21:03:03 (868) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:03:03: ExitCode 2. Method consumed 10 sec. in 13 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:03: WarpingToStation(060) 21:03:03 (869) Warp in progress. Code 1, Func : WarpingSubStop 21:03:03 (869) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:03:04: ExitCode 2. Method consumed 11 sec. in 14 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:04: WarpingToStation(060) 21:03:04 (870) Warp in progress. Code 1, Func : WarpingSubStop 21:03:04 (870) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:03:05: ExitCode 2. Method consumed 11 sec. in 15 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:05: WarpingToStation(060) 21:03:05 (871) Warp in progress. Code 1, Func : WarpingSubStop 21:03:06 (871) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:03:06: ExitCode 2. Method consumed 12 sec. in 16 runs (average 0 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:06: WarpingToStation(060) 21:03:06 (872) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:03:06 (872) Using Station Bookmark, Func : WarpingToStation 21:03:07 (872) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:03:07 (873) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:03:07 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:03:07 (873) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:03:07 1 9999999990 1234567890 209........XX 210.......XXX 211.....XXXXX 212.....XXX.. 213.....XXX.X 214.....XX..X 215...XXX.XX. 216...XXXX... 217...XXX.... 218.......... 21:03:07 (873) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:03:07 (873) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:03:07 (873) Bookmark Setup: detected empty 2line. Calc finished, detected bookmarks: 1, subfolders: 1, Func : BookmarkSetup 21:03:07 (873) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:03:07 (873) StationBookmarkX =121, StationBookmarkY =215, Func : WarpingToStation 21:03:07 (873) WarpClickAttempt = 0, Warping Start Time = 0, Func : WarpingToStation 21:03:16 (875) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:16 (875) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:16 (875) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:16 (876) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:17 (876) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:17 (876) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:17 (876) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:17 (876) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:17 (876) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:17 (877) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:18 (877) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:18 (877) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:18 (877) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:18 (877) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:18 (877) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:18 (878) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:19 (878) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:19 (878) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:19 (878) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:19 (878) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:19 (878) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:19 (879) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:20 (879) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:20 (879) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:20 (879) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:20 (879) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:20 (879) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:20 (880) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:21 (880) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:21 (880) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:21 (880) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:21 (880) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:21 (880) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:21 (881) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:22 (881) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:22 (881) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:22 (881) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:22 (881) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:22 (881) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:22 (882) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:23 (882) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:23 (882) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:23 (882) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:23 (882) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:23 (882) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:23 (883) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:24 (883) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:24 (883) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:24 (883) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:24 (883) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:24 (883) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:24 (884) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:25 (884) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:25 (884) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:25 (884) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:25 (884) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:25 (884) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:25 (885) APPROACH line not detected, Func : DockOrWarpLineClick 21:03:25 (885) Menu not detected. Code 0, Func : DockOrWarpLineClick 21:03:25 (885) DockOrWarpLineClick returned error. Attempt To Warp: 1. Code 2, Func : WarpingToStation ---> 21:03:26: ExitCode 2. Method consumed 25 sec. in 17 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:26: WarpingToStation(060) 21:03:26 (885) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:26: ExitCode 2. Method consumed 25 sec. in 18 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:26: WarpingToStation(060) 21:03:27 (886) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:27: ExitCode 2. Method consumed 26 sec. in 19 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:27: WarpingToStation(060) 21:03:28 (887) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:28: ExitCode 2. Method consumed 27 sec. in 20 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:28: WarpingToStation(060) 21:03:29 (888) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:29: ExitCode 2. Method consumed 28 sec. in 21 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:29: WarpingToStation(060) 21:03:30 (889) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:30: ExitCode 2. Method consumed 29 sec. in 22 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:30: WarpingToStation(060) 21:03:31 (890) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:31: ExitCode 2. Method consumed 30 sec. in 23 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:31: WarpingToStation(060) 21:03:32 (891) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:32: ExitCode 2. Method consumed 31 sec. in 24 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:32: WarpingToStation(060) 21:03:33 (892) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:33: ExitCode 2. Method consumed 31 sec. in 25 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:33: WarpingToStation(060) 21:03:34 (893) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:34: ExitCode 2. Method consumed 32 sec. in 26 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:34: WarpingToStation(060) 21:03:35 (894) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:03:35: ExitCode 2. Method consumed 33 sec. in 27 runs (average 1 secs/run), Next Line: 060 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:03:35: WarpingToStation(060) 21:03:36 (895) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:03:36 (895) Using Station Bookmark, Func : WarpingToStation 21:03:36 (895) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:03:37 (896) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:03:37 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:03:37 (896) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:03:37 1 9999999990 1234567890 209.......XXX 210.......XXX 211....XXXXXX 212....XXXX.. 213.....XXX.X 214...XXXX..X 215...XXXXXX. 216...XXXXX.. 217.XXXXXX... 218...XXX.... 21:03:37 (896) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:03:37 (896) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:03:37 (896) Bookmark Setup: detected empty 2line. Calc finished, detected bookmarks: 1, subfolders: 1, Func : BookmarkSetup 21:03:37 (896) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:03:37 (896) StationBookmarkX =121, StationBookmarkY =215, Func : WarpingToStation 21:03:37 (896) WarpClickAttempt = 1, Warping Start Time = 0, Func : WarpingToStation 21:03:38 (897) WARP TO line not detected, Func : DockOrWarpLineClick 21:03:38 (898) APPROACH line detected, Func : DockOrWarpLineClick 21:03:39 (898) DockOrWarpLineClick returned already in warp location. Code 3, Func : WarpingToStation ---> 21:03:39: ExitCode 3. Method consumed 38 sec. in 28 runs (average 1 secs/run), Next Line: 070+ ---> Desc: Returns 3 if success 21:03:39: DockingToStation(070) 21:03:39 (899) Region: Station Space Check, Func : DockingToStation 21:03:39 (899) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:03:39 (899) Region: Preset Check and Correction, Func : DockingToStation 21:03:40 (899) Region: Sorting Order Update And Selected Item Window Check, Func : DockingToStation 21:03:40 (899) Region: Overview Scan, Func : DockingToStation 21:03:40 (899) Region: First line check, Func : DockingToStation 21:03:40 (899) Region: Calculation position of a line to dock. UseAssemblyArray: False, Func : DockingToStation 21:03:40 (899) Position of a line to dock is 1, Func : DockingToStation 21:03:40 (899) Region: Warping Check, Func : DockingToStation 21:03:40 (899) Region: Approach Condition, docking line = 1, Func : DockingToStation 21:03:40 (899) Region: Final Dock And Exit, Func : DockingToStation 21:03:40 (899) Docking skipped because Player Owned Structure (Hangar or Assembly Array) detected. Code 3, Func : DockingToStation ---> 21:03:40: ExitCode 3. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 110+ ---> Desc: Returns 3 if POS detected in overview (corp hangar or assembly array) 21:03:40: GroupMode(110) 21:03:40 (899) This function did nothing because group EWO mode for hunter disabled. Code 0, Func : GroupEWOMode ---> 21:03:40: ExitCode 0. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 120+ ---> Desc: Returns 0 if EWO/FM flags Set or Unset or if function disabled 21:03:40: AFKLogOffTimers(120) 21:03:40 (900) Timers switched off. Eve process exists. Code 1, Func : AFKLogOffTimers ---> 21:03:40: ExitCode 1. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 150+ ---> Desc: Returns 1 if can continue (eve is on) 21:03:40: CheckLocalWait(150) * local check (900) 21:03:42 (901) Move#2 SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-TTRemovalErrorX130Y189W55H17-2013-09-19_21-03-41.bmp, from Zge, Func : RemoveToolTipFromAreas 21:03:42 (902) Local chat was detected as closed. Opening..., Func : OpenLocalChatWindowDTHP ---> 21:03:49: ExitCode 1. Method consumed 8 sec. in 1 runs (average 8 secs/run), Next Line: 140+ ---> Desc: Returns 1 if can continue 21:03:49: CustomDelay(140) 21:03:50 (909) New after undock delay =0, Func : CustomDelay 21:03:50 (909) In Space delay switched off. Code 1, Func : CustomDelay ---> 21:03:50: ExitCode 1. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 130+ ---> Desc: Returns 1 if can continue 21:03:50: UnloadCargoEx(130) 21:03:50 (909) Accepted parameter 2:True, Func : UnloadCargoEx 21:03:50 (909) Using cargohold, Func : UnloadCargoEx 21:03:53 (912) Finish. Code 1, Func : SetupCargoManager 21:03:53 (912) POS unload, Func : UnloadCargoEx 21:03:53 (912) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:03:54 (913) Finish. Code 1, Func : SetupCargoManager 21:03:57 (916) Finish. Code 1, Func : SetupCargoManager 21:03:57 (916) Opening New Window, Func : OpenAndSetupSecondCargoManager 21:04:02 (921) Select all command, Func : UnloadCargoEx 21:04:05 (924) Finish. Code 1, Func : SetupCargoManager 21:04:08 (927) Finish. Code 1, Func : SetupCargoManager 21:04:08 (927) Cargo unloaded, second cargo manager not closed, Func : UnloadCargoEx ---> 21:04:08: ExitCode 4. Method consumed 18 sec. in 1 runs (average 18 secs/run), Next Line: 200+ ---> Desc: Returns 4 if cargo unloaded to POS or function called in space with empty cargo (assuming POS operation) 21:04:08: EmergencyWarpOut(200) ---> 21:04:08: ExitCode 0. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 300 ---> Desc: Always returns 0 21:04:08: ReloadAmmo(300) 21:04:08 (928) Reloading ammo from poshangar, task |Nova Cruise Missile#12500|, Func : ReloadAmmo 21:04:09 (928) Finish. Code 1, Func : SetupCargoManager 21:04:09 (928) POS load, Func : LoadCargoEx 21:04:09 (929) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:04:10 (929) List of items to load:Nova Cruise Missile#12500, load all=False, Func : LoadCargoEx 21:04:10 (929) =Load item by item block=, Func : LoadCargoEx 21:04:10 (929) Items to load = 1, parsing item/quantity lines, Func : LoadCargoEx 21:04:10 (929) Item: 1, Name: Nova Cruise Missile, Quantity: 12500, Func : LoadCargoEx 21:04:10 (930) Finish. Code 1, Func : SetupCargoManager 21:04:10 (930) Attempt to drag cargo: 1, Func : LoadCargoEx 21:04:18 (938) Activation point to count items = {X=392; Y=373}, Func : LoadCargoEx 21:04:21 (941) Items present in hangar: 2, Func : LoadCargoEx 21:04:27 (946) Dragging item 1, quantity 12500, Func : LoadCargoEx 21:04:35 (954) Finish. Code 1, Func : SetupCargoManager 21:04:36 (955) Finish. Code 1, Func : SetupCargoManager 21:04:36 (955) Loaded item. New start time is 955, Func : LoadCargoEx 21:04:36 (955) Load process finished. Code 3, Func : LoadCargoEx ---> 21:04:36: ExitCode 3. Method consumed 27 sec. in 1 runs (average 27 secs/run), Next Line: 400 ---> Desc: Returns 3 if cargo was loaded 21:04:36: FleetMode(400) 21:04:36 (955) Fleet mode disabled. Code 1, Func : FleetMode ---> 21:04:36: ExitCode 1. Method consumed 0 sec. in 1 runs (average 0 secs/run), Next Line: 500+ ---> Desc: Returns 1 if module disabled or if fleet members do not wait for fleet if fleet is not ready 21:04:36: GroupMode(500) 21:04:36 (955) This function did nothing because group EWO mode for hunter disabled. Code 0, Func : GroupEWOMode ---> 21:04:36: ExitCode 0. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 210 ---> Desc: Returns 0 if EWO/FM flags Set or Unset or if function disabled 21:04:36: CheckLocalWait(210) ---> 21:04:37: ExitCode 1. Method consumed 9 sec. in 2 runs (average 4 secs/run), Next Line: 310+ ---> Desc: Returns 1 if can continue 21:04:37: UndockSub(310) 21:04:37 (956) Undock start time have been set - 956, Func : UndockSub 21:04:38 (957) Finish. Code 1, Func : SetupCargoManager 21:04:40 (959) Station space check returned 3, undocking not necessary, Func : UndockSub ---> 21:04:40: ExitCode 2. Method consumed 3 sec. in 1 runs (average 3 secs/run), Next Line: 410+ ---> Desc: Returns 2 if undock finished 21:04:40: CheckAnomalies(410) 21:04:40 (960) Applying parameter: reuse bookmark = True, Func : CheckAnomalies 21:04:40 (960) Current Anomaly ID is not defined, Func : CheckAnomalies 21:04:40 (960) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:04:46 (965) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:04:46 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:04:46 (965) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:04:46 1 9999999990 1234567890 209.......XXX 210.......XXX 211....XXXXXX 212....XXXX.. 213.....XXX.X 214...XXXX..X 215...XXXXXX. 216...XXXXX.. 217.XXXXXX... 218...XXX.... 21:04:46 (965) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:04:46 (965) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:04:46 (965) Bookmark Setup: detected empty 2line. Calc finished, detected bookmarks: 1, subfolders: 1, Func : BookmarkSetup 21:04:46 (965) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:04:46 (965) Bookmarks (1):, Func : DeleteAnomalyBookmark 21:04:46 (965) BookmarkName: ||, IsWhite: False, IsCorp: False, Index: 1, Func : DeleteAnomalyBookmark 21:04:46 (965) Anomaly bookmark not found. Code 2, Func : DeleteAnomalyBookmark 21:04:46 (965) DeleteAnomalyBookmark result: 3, scanning amomalies, Func : CheckAnomalies 21:04:48 (968) Dragging window attempt 1, Top=189, Left=265, Bottom=639, Right=775, Func : SetupScanner 21:04:48 (968) Top Correction, Func : SetupScanner 21:04:49 (968) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-BeforeTopCorrectionScanner-2013-09-19_21-04-49.bmp, Func : SetupScanner 21:04:50 (969) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-AfterTopCorrectionScanner-2013-09-19_21-04-50.bmp, Func : SetupScanner 21:04:50 (969) Bottom Correction, Func : SetupScanner 21:04:50 (970) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-BeforeBottomCorrectionScanner-2013-09-19_21-04-50.bmp, Func : SetupScanner 21:04:52 (971) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-AfterBottomCorrectionScanner-2013-09-19_21-04-52.bmp, Func : SetupScanner 21:04:52 (971) Left Correction, Func : SetupScanner 21:04:52 (971) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-BeforeLeftCorrectionScanner-2013-09-19_21-04-52.bmp, Func : SetupScanner 21:04:53 (973) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-AfterLeftCorrectionScanner-2013-09-19_21-04-53.bmp, Func : SetupScanner 21:04:53 (973) Right Correction, Func : SetupScanner 21:04:54 (973) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-BeforeRightCorrectionScanner-2013-09-19_21-04-53.bmp, Func : SetupScanner 21:04:55 (974) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-AfterRightCorrectionScanner-2013-09-19_21-04-55.bmp, Func : SetupScanner 21:04:55 (975) Dragging window attempt 2, Top=46, Left=192, Bottom=609, Right=866, Func : SetupScanner 21:04:55 (975) Delimiter Correction, Func : SetupScanner 21:04:56 (975) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-BeforeCenterCorrectionScanner-2013-09-19_21-04-55.bmp, Func : SetupScanner 21:04:57 (976) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-AfterCenterCorrectionScanner-2013-09-19_21-04-57.bmp, Func : SetupScanner 21:04:57 (977) Separator 1 Correction, Func : SetupScanner 21:04:59 (979) Separator 2 Correction, Func : SetupScanner 21:05:01 (980) Separator 3 Correction, Func : SetupScanner 21:05:03 (982) Separator 4 Correction, Func : SetupScanner 21:05:05 (984) Finish. Code 2, Func : SetupScanner 21:05:05 (984) Scan Result: 1/17: PosIndex: 0, ID: PVE-766, D: 37.78 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forlorn Den, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Forlorn Den, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 2/17: PosIndex: 1, ID: JVE-762, D: 4.58 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forlorn Hub, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Forlorn Hub, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 3/17: PosIndex: 2, ID: KVE-096, D: 34.91 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Hidden Rally Point, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Hidden Rally Point, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 4/17: PosIndex: 3, ID: ZVE-106, D: 2.47 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forlorn Rally Point, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Forlorn Rally Point, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 5/17: PosIndex: 4, ID: OVE-432, D: 37.21 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forsaken Den, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Forsaken Den, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 6/17: PosIndex: 5, ID: TVE-102, D: 4.84 AU, ScanGroup: Cosmic Anomaly, Group: Ore Site, Name: Average Arkonor and Bistot De, Func : CheckAnomalies 21:05:05 (984) Wrong group, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 7/17: PosIndex: 6, ID: NVE-098, D: 4.8 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Rally Point, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Rally Point, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 8/17: PosIndex: 7, ID: UVE-436, D: 5.63 AU, ScanGroup: Cosmic Anomaly, Group: Ore Site, Name: Smooth Glacial Mass Belt, Func : CheckAnomalies 21:05:05 (984) Wrong group, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 9/17: PosIndex: 8, ID: BCB-627, D: 5.48 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Port, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Port, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 10/17: PosIndex: 9, ID: QVE-100, D: 7.1 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forsaken Rally Point, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Forsaken Rally Point, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 11/17: PosIndex: 10, ID: QKS-560, D: 0.58 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Drone Patrol, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Drone Patrol, Func : CheckAnomalies 21:05:05 (984) Is Wrong Keyword, next..., Func : CheckAnomalies 21:05:05 (984) Scan Result: 12/17: PosIndex: 11, ID: KIU-520, D: 1.35 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Hub, Func : CheckAnomalies 21:05:05 (984) Checking keywords (1) :, Func : CheckAnomalies 21:05:05 (984) |Angel Hub|, Func : CheckAnomalies 21:05:05 (984) Anomaly name: Angel Hub, Func : CheckAnomalies 21:05:05 (984) Found keyword: Angel Hub, Func : CheckAnomalies 21:05:22 (1001) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:05:22 (1001) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:05:22 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:05:22 (1001) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:05:22 1 9999999990 1234567890 209........XX 210.......XXX 211.....XXXXX 212.....XXX.. 213.....XXX.X 214.....XX..X 215...XXX.XX. 216...XXXX... 217...XXX.... 218.......... 21:05:22 (1001) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:05:22 (1001) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:05:22 (1001) Bookmark Setup, green lines detected: 2, Func : BookmarkSetup 21:05:22 (1001) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:05:22 (1001) Bookmark in 1, name || is marked as empty (not anomaly bookmark), Func : BookmarkSetup 21:05:22 (1001) CurrentLocationIndex = 0, Func : CheckAnomalies 21:05:22 (1001) Anomaly KIU-520 bookmarked. Code 2, Func : CheckAnomalies ---> 21:05:22: ExitCode 2. Method consumed 41 sec. in 1 runs (average 41 secs/run), Next Line: 220+ ---> Desc: Returns 2 if new anomaly was bookmarked or old bookmark reused. Set parameter as true to reuse old bookmarks 21:05:23: CheckLocal(220) ---> 21:05:25: ExitCode 1. Method consumed 2 sec. in 1 runs (average 2 secs/run), Next Line: 320+ ---> Desc: Returns 1 if avoid not required 21:05:25: WarpingToLocation(320) 21:05:25 (1004) Applying parameter: line to warp is 1, Func : WarpingToBMark 21:05:26 (1005) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:05:28 (1007) Open PNP Time: 2138ms, Func : WarpingToBMark 21:05:28 (1007) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:05:28 (1007) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:05:28 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:05:28 (1007) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:05:28 1 9999999990 1234567890 209........XX 210.......XXX 211.....XXXXX 212.....XXX.. 213.....XXX.X 214.....XX..X 215...XXX.XX. 216...XXXX... 217...XXX.... 218.......... 21:05:28 (1007) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:05:28 (1007) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:05:28 (1007) Bookmark Setup, green lines detected: 2, Func : BookmarkSetup 21:05:29 (1008) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:05:29 (1008) Bookmark in 1, name || is marked as empty (not anomaly bookmark), Func : BookmarkSetup 21:05:29 (1008) Bookmark Setup Time: 918ms, Func : WarpingToBMark 21:05:29 (1008) Warp to line 2, X =121, Y =235, Func : WarpingToBMark 21:05:29 (1008) Warpinmg at 70 km, lineIndex = 5, Func : WarpLineClick 21:05:30 (1010) WARP TO line not detected, Func : WarpLineClick 21:05:30 (1010) APPROACH line detected, Func : WarpLineClick 21:05:31 (1011) WarpLineClick returned already in warp location. Code 3, Func : WarpingToBMark ---> 21:05:32: ExitCode 3. Method consumed 6 sec. in 1 runs (average 6 secs/run), Next Line: 420+ ---> Desc: Returns 3 if ship in location 21:05:32: CheckLocal(420) ---> 21:05:35: ExitCode 1. Method consumed 5 sec. in 2 runs (average 2 secs/run), Next Line: 520+ ---> Desc: Returns 1 if avoid not required 21:05:35: AvoidShipsHunter(520) * local check (1017) 21:05:39 (1018) No avoid condition found. Code 2, Func : AvoidShips ---> 21:05:39: ExitCode 2. Method consumed 3 sec. in 1 runs (average 3 secs/run), Next Line: 230+ ---> Desc: Returns 2 if no problems or avoid PC/Incursion disabled 21:05:39: CheckLocal(230) ---> 21:05:39: ExitCode 1. Method consumed 5 sec. in 3 runs (average 1 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:05:39: BeltHunter(330) 21:05:40 (1020) Grouping weapons. Code 1, Func : BeltHunter ---> 21:05:41: ExitCode 1. Method consumed 1 sec. in 1 runs (average 1 secs/run), Next Line: 430+ ---> Desc: Returns 1 if in fight or during targeting correction 21:05:41: StopOperationHunter(430) * local check (1020) 21:05:41 (1020) New start operation time: 1020, Func : StopOperationHunter 21:05:42 (1021) Finish. Code 1, Func : SetupCargoManager 21:05:42 (1021) New fight time: 1021, Func : StopOperationHunter 21:05:45 (1025) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:05:45 (1025) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:05:46: ExitCode 1. Method consumed 4 sec. in 1 runs (average 4 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:05:46: CheckLocal(230) ---> 21:05:46: ExitCode 1. Method consumed 6 sec. in 4 runs (average 1 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:05:46: BeltHunter(330) 21:05:46 (1026) Current preset = (1), Func : BeltHunter 21:05:46 (1026) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:05:46 (1026) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:05:46 (1026) NPCs: 0, Func : BeltHunter 21:05:46 (1026) Current Respawn is NULL, Func : BeltHunter 21:05:46 (1026) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:05:47: ExitCode 3. Method consumed 1 sec. in 2 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:05:47: StopOperationHunter(430) * local check (1026) 21:05:48 (1027) Finish. Code 1, Func : SetupCargoManager 21:05:48 (1027) New fight time: 1027, Func : StopOperationHunter 21:05:48 (1027) Stop fight condition, Func : StopOperationHunter 21:05:48 (1027) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:05:48 (1027) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:05:48: ExitCode 1. Method consumed 5 sec. in 2 runs (average 2 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:05:48: CheckLocal(230) ---> 21:05:48: ExitCode 1. Method consumed 6 sec. in 5 runs (average 1 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:05:48: BeltHunter(330) 21:05:48 (1028) Current preset = (1), Func : BeltHunter 21:05:48 (1028) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:05:48 (1028) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:05:48 (1028) NPCs: 0, Func : BeltHunter 21:05:48 (1028) Current Respawn is NULL, Func : BeltHunter 21:05:48 (1028) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:05:48: ExitCode 3. Method consumed 1 sec. in 3 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:05:49: StopOperationHunter(430) 21:05:49 (1029) Finish. Code 1, Func : SetupCargoManager 21:05:49 (1029) New fight time: 1029, Func : StopOperationHunter 21:05:49 (1029) Stop fight condition, Func : StopOperationHunter 21:05:49 (1029) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:05:49 (1029) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:05:50: ExitCode 1. Method consumed 6 sec. in 3 runs (average 2 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:05:50: CheckLocal(230) ---> 21:05:50: ExitCode 1. Method consumed 7 sec. in 6 runs (average 1 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:05:50: BeltHunter(330) 21:05:51 (1030) Current preset = (1), Func : BeltHunter 21:05:51 (1030) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:05:51 (1030) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:05:51 (1030) NPCs: 0, Func : BeltHunter 21:05:51 (1030) Current Respawn is NULL, Func : BeltHunter 21:05:51 (1030) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:05:51: ExitCode 3. Method consumed 2 sec. in 4 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:05:51: StopOperationHunter(430) 21:05:52 (1031) Finish. Code 1, Func : SetupCargoManager 21:05:52 (1031) New fight time: 1031, Func : StopOperationHunter 21:05:52 (1031) Stop fight condition, Func : StopOperationHunter 21:05:52 (1031) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:05:52 (1031) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:05:52: ExitCode 1. Method consumed 7 sec. in 4 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:05:52: CheckLocal(230) ---> 21:05:52: ExitCode 1. Method consumed 7 sec. in 7 runs (average 1 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:05:52: BeltHunter(330) 21:05:53 (1032) Current preset = (1), Func : BeltHunter 21:05:53 (1032) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:05:53 (1032) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:05:53 (1032) NPCs: 0, Func : BeltHunter 21:05:53 (1032) Current Respawn is NULL, Func : BeltHunter 21:05:53 (1032) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:05:53: ExitCode 3. Method consumed 2 sec. in 5 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:05:53: StopOperationHunter(430) * local check (1032) 21:05:54 (1033) Finish. Code 1, Func : SetupCargoManager 21:05:54 (1033) New fight time: 1033, Func : StopOperationHunter 21:05:54 (1033) Stop fight condition, Func : StopOperationHunter 21:05:54 (1033) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:05:54 (1033) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:05:54: ExitCode 1. Method consumed 8 sec. in 5 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:05:54: CheckLocal(230) ---> 21:05:54: ExitCode 1. Method consumed 7 sec. in 8 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:05:54: BeltHunter(330) 21:05:55 (1034) Current preset = (1), Func : BeltHunter 21:05:55 (1034) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:05:55 (1034) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:05:55 (1034) NPCs: 0, Func : BeltHunter 21:05:55 (1034) Current Respawn is NULL, Func : BeltHunter 21:05:55 (1034) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:05:55: ExitCode 3. Method consumed 2 sec. in 6 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:05:55: StopOperationHunter(430) 21:05:56 (1035) Finish. Code 1, Func : SetupCargoManager 21:05:56 (1035) New fight time: 1035, Func : StopOperationHunter 21:05:56 (1035) Stop fight condition, Func : StopOperationHunter 21:05:56 (1035) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:05:56 (1035) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:05:56: ExitCode 1. Method consumed 9 sec. in 6 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:05:56: CheckLocal(230) ---> 21:05:57: ExitCode 1. Method consumed 8 sec. in 9 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:05:57: BeltHunter(330) 21:05:57 (1036) Current preset = (1), Func : BeltHunter 21:05:57 (1036) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:05:57 (1036) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:05:57 (1036) NPCs: 0, Func : BeltHunter 21:05:57 (1036) Current Respawn is NULL, Func : BeltHunter 21:05:57 (1036) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:05:57: ExitCode 3. Method consumed 3 sec. in 7 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:05:57: StopOperationHunter(430) 21:05:58 (1037) Finish. Code 1, Func : SetupCargoManager 21:05:58 (1037) New fight time: 1037, Func : StopOperationHunter 21:05:58 (1037) Stop fight condition, Func : StopOperationHunter 21:05:58 (1037) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:05:58 (1037) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:05:58: ExitCode 1. Method consumed 10 sec. in 7 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:05:58: CheckLocal(230) ---> 21:05:59: ExitCode 1. Method consumed 8 sec. in 10 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:05:59: BeltHunter(330) 21:05:59 (1038) Current preset = (1), Func : BeltHunter 21:05:59 (1038) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:05:59 (1038) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:05:59 (1038) NPCs: 0, Func : BeltHunter 21:05:59 (1038) Current Respawn is NULL, Func : BeltHunter 21:05:59 (1038) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:05:59: ExitCode 3. Method consumed 3 sec. in 8 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:05:59: StopOperationHunter(430) * local check (1038) 21:06:00 (1039) Finish. Code 1, Func : SetupCargoManager 21:06:00 (1039) New fight time: 1039, Func : StopOperationHunter 21:06:00 (1039) Stop fight condition, Func : StopOperationHunter 21:06:00 (1039) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:00 (1039) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:06:00: ExitCode 1. Method consumed 11 sec. in 8 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:06:00: CheckLocal(230) ---> 21:06:01: ExitCode 1. Method consumed 8 sec. in 11 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:06:01: BeltHunter(330) 21:06:01 (1040) Current preset = (1), Func : BeltHunter 21:06:01 (1040) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:06:01 (1040) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:06:01 (1040) NPCs: 0, Func : BeltHunter 21:06:01 (1040) Current Respawn is NULL, Func : BeltHunter 21:06:01 (1040) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:06:01: ExitCode 3. Method consumed 3 sec. in 9 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:06:01: StopOperationHunter(430) 21:06:02 (1041) Finish. Code 1, Func : SetupCargoManager 21:06:02 (1041) New fight time: 1041, Func : StopOperationHunter 21:06:02 (1041) Stop fight condition, Func : StopOperationHunter 21:06:02 (1041) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:02 (1041) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:06:02: ExitCode 1. Method consumed 12 sec. in 9 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:06:02: CheckLocal(230) ---> 21:06:03: ExitCode 1. Method consumed 9 sec. in 12 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:06:03: BeltHunter(330) 21:06:03 (1042) Current preset = (1), Func : BeltHunter 21:06:03 (1042) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:06:03 (1042) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:06:03 (1042) NPCs: 0, Func : BeltHunter 21:06:03 (1042) Current Respawn is NULL, Func : BeltHunter 21:06:03 (1042) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:06:03: ExitCode 3. Method consumed 4 sec. in 10 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:06:03: StopOperationHunter(430) 21:06:04 (1043) Finish. Code 1, Func : SetupCargoManager 21:06:04 (1043) New fight time: 1043, Func : StopOperationHunter 21:06:04 (1043) Stop fight condition, Func : StopOperationHunter 21:06:04 (1043) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:04 (1043) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:06:04: ExitCode 1. Method consumed 13 sec. in 10 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:06:04: CheckLocal(230) ---> 21:06:05: ExitCode 1. Method consumed 9 sec. in 13 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:06:05: BeltHunter(330) 21:06:05 (1044) Current preset = (1), Func : BeltHunter 21:06:05 (1044) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:06:05 (1044) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:06:05 (1044) NPCs: 0, Func : BeltHunter 21:06:05 (1044) Current Respawn is NULL, Func : BeltHunter 21:06:05 (1044) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:06:05: ExitCode 3. Method consumed 4 sec. in 11 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:06:05: StopOperationHunter(430) * local check (1045) 21:06:06 (1045) Finish. Code 1, Func : SetupCargoManager 21:06:06 (1045) New fight time: 1045, Func : StopOperationHunter 21:06:06 (1045) Stop fight condition, Func : StopOperationHunter 21:06:06 (1045) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:06 (1045) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:06:06: ExitCode 1. Method consumed 14 sec. in 11 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:06:06: CheckLocal(230) ---> 21:06:07: ExitCode 1. Method consumed 9 sec. in 14 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:06:07: BeltHunter(330) 21:06:07 (1046) Current preset = (1), Func : BeltHunter 21:06:07 (1046) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:06:07 (1046) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:06:07 (1046) NPCs: 0, Func : BeltHunter 21:06:07 (1046) Current Respawn is NULL, Func : BeltHunter 21:06:07 (1046) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:06:07: ExitCode 3. Method consumed 4 sec. in 12 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:06:07: StopOperationHunter(430) 21:06:08 (1047) Finish. Code 1, Func : SetupCargoManager 21:06:08 (1047) New fight time: 1047, Func : StopOperationHunter 21:06:08 (1047) Stop fight condition, Func : StopOperationHunter 21:06:08 (1047) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:08 (1047) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:06:08: ExitCode 1. Method consumed 14 sec. in 12 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:06:08: CheckLocal(230) ---> 21:06:09: ExitCode 1. Method consumed 10 sec. in 15 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:06:09: BeltHunter(330) 21:06:09 (1048) Current preset = (1), Func : BeltHunter 21:06:09 (1048) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:06:09 (1048) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:06:09 (1048) NPCs: 0, Func : BeltHunter 21:06:09 (1048) Current Respawn is NULL, Func : BeltHunter 21:06:09 (1048) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:06:09: ExitCode 3. Method consumed 5 sec. in 13 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:06:09: StopOperationHunter(430) 21:06:10 (1050) Finish. Code 1, Func : SetupCargoManager 21:06:10 (1050) New fight time: 1050, Func : StopOperationHunter 21:06:10 (1050) Stop fight condition, Func : StopOperationHunter 21:06:10 (1050) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:10 (1050) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:06:10: ExitCode 1. Method consumed 15 sec. in 13 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:06:10: CheckLocal(230) ---> 21:06:11: ExitCode 1. Method consumed 10 sec. in 16 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:06:11: BeltHunter(330) 21:06:11 (1050) Current preset = (1), Func : BeltHunter 21:06:11 (1050) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:06:11 (1050) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:06:11 (1050) NPCs: 0, Func : BeltHunter 21:06:11 (1050) Current Respawn is NULL, Func : BeltHunter 21:06:11 (1050) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:06:11: ExitCode 3. Method consumed 5 sec. in 14 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:06:11: StopOperationHunter(430) * local check (1051) 21:06:12 (1052) Finish. Code 1, Func : SetupCargoManager 21:06:12 (1052) New fight time: 1052, Func : StopOperationHunter 21:06:12 (1052) Stop fight condition, Func : StopOperationHunter 21:06:12 (1052) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:12 (1052) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:06:13: ExitCode 1. Method consumed 16 sec. in 14 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:06:13: CheckLocal(230) ---> 21:06:13: ExitCode 1. Method consumed 10 sec. in 17 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:06:13: BeltHunter(330) 21:06:13 (1053) Current preset = (1), Func : BeltHunter 21:06:13 (1053) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:06:13 (1053) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:06:13 (1053) NPCs: 0, Func : BeltHunter 21:06:13 (1053) Current Respawn is NULL, Func : BeltHunter 21:06:13 (1053) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:06:13: ExitCode 3. Method consumed 5 sec. in 15 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:06:14: StopOperationHunter(430) 21:06:14 (1054) Finish. Code 1, Func : SetupCargoManager 21:06:14 (1054) New fight time: 1054, Func : StopOperationHunter 21:06:14 (1054) Stop fight condition, Func : StopOperationHunter 21:06:14 (1054) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:14 (1054) Waiting for new NPC respawn. Code 1, Func : StopOperationHunter ---> 21:06:15: ExitCode 1. Method consumed 17 sec. in 15 runs (average 1 secs/run), Next Line: 230 ---> Desc: Returns 1 if no stop required 21:06:15: CheckLocal(230) ---> 21:06:15: ExitCode 1. Method consumed 11 sec. in 18 runs (average 0 secs/run), Next Line: 330+ ---> Desc: Returns 1 if avoid not required 21:06:15: BeltHunter(330) 21:06:16 (1055) Current preset = (1), Func : BeltHunter 21:06:16 (1055) List of NPCs formed, detecting current respawn, Func : BeltHunter 21:06:16 (1055) StartFightTime = 0, anomaly hunting: True, current respawn => NULL, Func : BeltHunter 21:06:16 (1055) NPCs: 0, Func : BeltHunter 21:06:16 (1055) Current Respawn is NULL, Func : BeltHunter 21:06:16 (1055) No NPCs detected, fight finished. Code 3, Func : BeltHunter ---> 21:06:16: ExitCode 3. Method consumed 5 sec. in 16 runs (average 0 secs/run), Next Line: 430+ ---> Desc: Returns 3 in fight finished 21:06:16: StopOperationHunter(430) 21:06:17 (1056) Finish. Code 1, Func : SetupCargoManager 21:06:17 (1056) New fight time: 1056, Func : StopOperationHunter 21:06:17 (1056) Stop fight condition, Func : StopOperationHunter 21:06:17 (1056) No NPCs detected or NPCs required to kill detected or NPCs required to kill in range after timeout or due to min range check, Func : StopOperationHunter 21:06:17 (1056) NPCs did not appear after NPC respawn timeout, Func : StopOperationHunter 21:06:17 (1056) Going to the next location. Code 2, Func : StopOperationHunter ---> 21:06:17: ExitCode 2. Method consumed 18 sec. in 16 runs (average 1 secs/run), Next Line: 240+ ---> Desc: Returns 2 if no NPCs to kill left, fight timeout reached 21:06:17: WarpingToStation(240) 21:06:17 (1056) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:06:17 (1056) Using Station Bookmark, Func : WarpingToStation 21:06:19 (1058) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:06:20 (1059) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:06:20 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:06:20 (1059) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:06:20 1 9999999990 1234567890 209........XX 210.......XXX 211.....XXXXX 212.....XXX.. 213.....XXX.X 214.....XX..X 215...XXX.XX. 216...XXXX... 217...XXX.... 218.......... 21:06:20 (1059) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:06:20 (1059) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:06:20 (1059) Bookmark Setup, green lines detected: 2, Func : BookmarkSetup 21:06:20 (1059) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:06:20 (1059) Bookmark in 1, name || is marked as empty (not anomaly bookmark), Func : BookmarkSetup 21:06:20 (1059) StationBookmarkX =121, StationBookmarkY =215, Func : WarpingToStation 21:06:20 (1059) WarpClickAttempt = 0, Warping Start Time = 0, Func : WarpingToStation 21:06:23 (1062) Warp line detected and clicked. Code 2, Func : DockOrWarpLineClick 21:06:23 (1062) Warp line clicked. Attempt To Warp: 1. Code 2, Func : WarpingToStation ---> 21:06:23: ExitCode 2. Method consumed 43 sec. in 29 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:23: WarpingToStation(240) 21:06:23 (1062) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:23: ExitCode 2. Method consumed 43 sec. in 30 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:23: WarpingToStation(240) 21:06:24 (1063) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:24: ExitCode 2. Method consumed 44 sec. in 31 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:24: WarpingToStation(240) 21:06:25 (1064) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:25: ExitCode 2. Method consumed 45 sec. in 32 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:25: WarpingToStation(240) 21:06:26 (1065) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:26: ExitCode 2. Method consumed 46 sec. in 33 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:26: WarpingToStation(240) 21:06:27 (1066) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:27: ExitCode 2. Method consumed 47 sec. in 34 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:27: WarpingToStation(240) 21:06:28 (1067) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:28: ExitCode 2. Method consumed 48 sec. in 35 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:28: WarpingToStation(240) 21:06:29 (1068) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:29: ExitCode 2. Method consumed 48 sec. in 36 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:29: WarpingToStation(240) 21:06:30 (1069) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:30: ExitCode 2. Method consumed 49 sec. in 37 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:30: WarpingToStation(240) 21:06:31 (1070) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:31: ExitCode 2. Method consumed 50 sec. in 38 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:31: WarpingToStation(240) 21:06:32 (1071) Last warping attempt was less then 10 seconds ago. Code 2, Func : WarpingToStation ---> 21:06:32: ExitCode 2. Method consumed 51 sec. in 39 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:32: WarpingToStation(240) 21:06:33 (1072) Warp in progress. Code 1, Func : WarpingSubStop 21:06:37 (1076) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:37: ExitCode 2. Method consumed 56 sec. in 40 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:37: WarpingToStation(240) 21:06:37 (1076) Warp in progress. Code 1, Func : WarpingSubStop 21:06:37 (1076) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:37: ExitCode 2. Method consumed 56 sec. in 41 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:37: WarpingToStation(240) 21:06:38 (1077) Warp in progress. Code 1, Func : WarpingSubStop 21:06:38 (1077) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:38: ExitCode 2. Method consumed 57 sec. in 42 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:38: WarpingToStation(240) 21:06:39 (1078) Warp in progress. Code 1, Func : WarpingSubStop 21:06:39 (1078) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:39: ExitCode 2. Method consumed 58 sec. in 43 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:39: WarpingToStation(240) 21:06:40 (1079) Warp in progress. Code 1, Func : WarpingSubStop 21:06:40 (1079) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:40: ExitCode 2. Method consumed 58 sec. in 44 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:40: WarpingToStation(240) 21:06:41 (1080) Warp in progress. Code 1, Func : WarpingSubStop 21:06:41 (1080) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:41: ExitCode 2. Method consumed 59 sec. in 45 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:41: WarpingToStation(240) 21:06:42 (1081) Warp in progress. Code 1, Func : WarpingSubStop 21:06:42 (1081) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:42: ExitCode 2. Method consumed 60 sec. in 46 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:42: WarpingToStation(240) 21:06:43 (1082) Warp in progress. Code 1, Func : WarpingSubStop 21:06:43 (1082) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:43: ExitCode 2. Method consumed 61 sec. in 47 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:43: WarpingToStation(240) 21:06:44 (1083) Warp in progress. Code 1, Func : WarpingSubStop 21:06:44 (1083) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:44: ExitCode 2. Method consumed 62 sec. in 48 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:44: WarpingToStation(240) 21:06:45 (1084) Warp in progress. Code 1, Func : WarpingSubStop 21:06:45 (1084) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:45: ExitCode 2. Method consumed 63 sec. in 49 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:45: WarpingToStation(240) 21:06:46 (1085) Warp in progress. Code 1, Func : WarpingSubStop 21:06:46 (1085) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:46: ExitCode 2. Method consumed 63 sec. in 50 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:46: WarpingToStation(240) 21:06:47 (1086) Warp in progress. Code 1, Func : WarpingSubStop 21:06:47 (1086) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:47: ExitCode 2. Method consumed 64 sec. in 51 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:47: WarpingToStation(240) 21:06:48 (1087) Warp in progress. Code 1, Func : WarpingSubStop 21:06:48 (1087) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:48: ExitCode 2. Method consumed 65 sec. in 52 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:48: WarpingToStation(240) 21:06:49 (1088) Warp in progress. Code 1, Func : WarpingSubStop 21:06:49 (1088) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:49: ExitCode 2. Method consumed 66 sec. in 53 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:49: WarpingToStation(240) 21:06:50 (1089) Warp in progress. Code 1, Func : WarpingSubStop 21:06:50 (1089) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:50: ExitCode 2. Method consumed 67 sec. in 54 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:50: WarpingToStation(240) 21:06:51 (1090) Warp in progress. Code 1, Func : WarpingSubStop 21:06:51 (1090) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:51: ExitCode 2. Method consumed 67 sec. in 55 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:51: WarpingToStation(240) 21:06:52 (1091) Warp in progress. Code 1, Func : WarpingSubStop 21:06:52 (1091) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:52: ExitCode 2. Method consumed 68 sec. in 56 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:52: WarpingToStation(240) 21:06:53 (1092) Warp in progress. Code 1, Func : WarpingSubStop 21:06:53 (1092) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:53: ExitCode 2. Method consumed 69 sec. in 57 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:53: WarpingToStation(240) 21:06:54 (1093) Warp in progress. Code 1, Func : WarpingSubStop 21:06:54 (1093) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:54: ExitCode 2. Method consumed 70 sec. in 58 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:55: WarpingToStation(240) 21:06:55 (1094) Warp in progress. Code 1, Func : WarpingSubStop 21:06:55 (1094) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:55: ExitCode 2. Method consumed 71 sec. in 59 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:55: WarpingToStation(240) 21:06:56 (1095) Warp in progress. Code 1, Func : WarpingSubStop 21:06:56 (1095) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:56: ExitCode 2. Method consumed 71 sec. in 60 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:56: WarpingToStation(240) 21:06:57 (1096) Warp in progress. Code 1, Func : WarpingSubStop 21:06:57 (1096) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:57: ExitCode 2. Method consumed 72 sec. in 61 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:58: WarpingToStation(240) 21:06:58 (1097) Warp in progress. Code 1, Func : WarpingSubStop 21:06:58 (1097) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:58: ExitCode 2. Method consumed 73 sec. in 62 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:58: WarpingToStation(240) 21:06:59 (1098) Warp in progress. Code 1, Func : WarpingSubStop 21:06:59 (1098) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:06:59: ExitCode 2. Method consumed 74 sec. in 63 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:06:59: WarpingToStation(240) 21:07:00 (1099) Warp in progress. Code 1, Func : WarpingSubStop 21:07:00 (1099) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:07:00: ExitCode 2. Method consumed 75 sec. in 64 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:07:01: WarpingToStation(240) 21:07:01 (1100) Warp in progress. Code 1, Func : WarpingSubStop 21:07:01 (1100) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:07:01: ExitCode 2. Method consumed 75 sec. in 65 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:07:01: WarpingToStation(240) 21:07:02 (1101) Warp in progress. Code 1, Func : WarpingSubStop 21:07:02 (1101) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:07:02: ExitCode 2. Method consumed 76 sec. in 66 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:07:02: WarpingToStation(240) 21:07:03 (1102) Warp in progress. Code 1, Func : WarpingSubStop 21:07:03 (1102) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:07:03: ExitCode 2. Method consumed 77 sec. in 67 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:07:03: WarpingToStation(240) 21:07:04 (1103) Warp in progress. Code 1, Func : WarpingSubStop 21:07:04 (1103) WarpingSubStop returned warp in progress. Code 2, Func : WarpingToStation ---> 21:07:04: ExitCode 2. Method consumed 78 sec. in 68 runs (average 1 secs/run), Next Line: 240 ---> Desc: Returns 2 if function started warp. Loop to the same line to wait while warp finishes and exit by return code 3 - success 21:07:04: WarpingToStation(240) 21:07:05 (1104) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:07:05 (1104) Using Station Bookmark, Func : WarpingToStation 21:07:05 (1104) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:07:06 (1105) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:07:06 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:07:06 (1105) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:07:06 1 9999999990 1234567890 209.......XXX 210.......XXX 211....XXXXXX 212....XXXX.. 213.....XXX.X 214...XXXX..X 215...XXXXXX. 216...XXXXX.. 217.XXXXXX... 218...XXX.... 21:07:06 (1105) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:07:06 (1105) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:07:06 (1105) Bookmark Setup, green lines detected: 2, Func : BookmarkSetup 21:07:06 (1105) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:07:06 (1105) Bookmark in 1, name || is marked as empty (not anomaly bookmark), Func : BookmarkSetup 21:07:06 (1105) StationBookmarkX =121, StationBookmarkY =215, Func : WarpingToStation 21:07:06 (1105) WarpClickAttempt = 0, Warping Start Time = 0, Func : WarpingToStation 21:07:08 (1107) WARP TO line not detected, Func : DockOrWarpLineClick 21:07:08 (1107) APPROACH line detected, Func : DockOrWarpLineClick 21:07:09 (1108) DockOrWarpLineClick returned already in warp location. Code 3, Func : WarpingToStation ---> 21:07:09: ExitCode 3. Method consumed 82 sec. in 69 runs (average 1 secs/run), Next Line: 340+ ---> Desc: Returns 3 if success 21:07:09: CheckLocal(340) 21:07:10 (1109) Move#2 SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-TTRemovalErrorX130Y188W69H17-2013-09-19_21-07-10.bmp, from Zge, Func : RemoveToolTipFromAreas ---> 21:07:13: ExitCode 1. Method consumed 15 sec. in 19 runs (average 0 secs/run), Next Line: 510+ ---> Desc: Returns 1 if avoid not required 21:07:13: CheckAnomalies(510) 21:07:13 (1112) Applying parameter: reuse bookmark = False, Func : CheckAnomalies 21:07:13 (1112) Current Anomaly ID: KIU-520, Func : CheckAnomalies 21:07:13 (1112) Current Anomaly ID: KIU-520 is marked as empty, Func : CheckAnomalies 21:07:13 (1112) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:07:19 (1118) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:07:19 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:07:19 (1118) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:07:19 1 9999999990 1234567890 209.......XXX 210.......XXX 211....XXXXXX 212....XXXX.. 213.....XXX.X 214...XXXX..X 215...XXXXXX. 216...XXXXX.. 217.XXXXXX... 218...XXX.... 21:07:19 (1118) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:07:19 (1118) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:07:19 (1118) Bookmark Setup, green lines detected: 2, Func : BookmarkSetup 21:07:19 (1118) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:07:19 (1118) Bookmark in 1, name || is marked as empty (not anomaly bookmark), Func : BookmarkSetup 21:07:19 (1118) Bookmarks (2):, Func : DeleteAnomalyBookmark 21:07:19 (1118) BookmarkName: |1-Anomaly|, IsWhite: False, IsCorp: False, Index: 1, Func : DeleteAnomalyBookmark 21:07:19 (1118) BookmarkName: ||, IsWhite: False, IsCorp: False, Index: 2, Func : DeleteAnomalyBookmark 21:07:25 (1124) Bookmark Setup: max bookmark number = 2, Func : BookmarkSetup 21:07:26 (1125) Subfolder detection: lineIndex= 0, down=False, right=True, Func : BookmarkSetup Pattern recorded on 21:07:26 1 9999999990 1234567890 189.......... 190....X..... 191....XX.... 192....XXX... 193....XXXX.. 194....XXX... 195....XX.... 196....X..... 197.......... 198.......... 21:07:26 (1125) Subfolder detection: lineIndex= 1, down=False, right=False, Func : BookmarkSetup Pattern recorded on 21:07:26 1 9999999990 1234567890 209........XX 210.......XXX 211.....XXXXX 212.....XXX.. 213.....XXX.X 214.....XX..X 215...XXX.XX. 216...XXXX... 217...XXX.... 218.......... 21:07:26 (1125) Subfolder detection: exited when lineIndex= 1 == number of subfolders, Func : BookmarkSetup 21:07:26 (1125) Bookmark Setup, green lines detected: 1, Func : BookmarkSetup 21:07:26 (1125) Bookmark Setup: detected empty 2line. Calc finished, detected bookmarks: 1, subfolders: 1, Func : BookmarkSetup 21:07:26 (1125) Using Anomalies Block, anomaly bookmark name is |1-Anomaly|, Func : BookmarkSetup 21:07:26 (1125) Bookmarks (1):, Func : DeleteAnomalyBookmark 21:07:26 (1125) BookmarkName: ||, IsWhite: False, IsCorp: False, Index: 1, Func : DeleteAnomalyBookmark 21:07:26 (1125) Anomaly bookmark deleted. Code 2, Func : DeleteAnomalyBookmark 21:07:26 (1125) DeleteAnomalyBookmark result: 3, scanning amomalies, Func : CheckAnomalies 21:07:28 (1128) Finish. Code 2, Func : SetupScanner 21:07:28 (1128) Scan Result: 1/17: PosIndex: 0, ID: PVE-766, D: 37.45 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forlorn Den, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Forlorn Den, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 2/17: PosIndex: 1, ID: JVE-762, D: 3.75 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forlorn Hub, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Forlorn Hub, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 3/17: PosIndex: 2, ID: KVE-096, D: 33.83 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Hidden Rally Point, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Hidden Rally Point, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 4/17: PosIndex: 3, ID: ZVE-106, D: 2.26 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forlorn Rally Point, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Forlorn Rally Point, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 5/17: PosIndex: 4, ID: OVE-432, D: 36.12 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forsaken Den, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Forsaken Den, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 6/17: PosIndex: 5, ID: TVE-102, D: 6.1 AU, ScanGroup: Cosmic Anomaly, Group: Ore Site, Name: Average Arkonor and Bistot De, Func : CheckAnomalies 21:07:28 (1128) Wrong group, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 7/17: PosIndex: 6, ID: NVE-098, D: 3.8 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Rally Point, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Rally Point, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 8/17: PosIndex: 7, ID: UVE-436, D: 5.01 AU, ScanGroup: Cosmic Anomaly, Group: Ore Site, Name: Smooth Glacial Mass Belt, Func : CheckAnomalies 21:07:28 (1128) Wrong group, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 9/17: PosIndex: 8, ID: BCB-627, D: 4.82 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Port, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Port, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 10/17: PosIndex: 9, ID: QVE-100, D: 8.34 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forsaken Rally Point, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Forsaken Rally Point, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 11/17: PosIndex: 10, ID: QKS-560, D: 1.51 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Drone Patrol, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Drone Patrol, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 12/17: PosIndex: 11, ID: KIU-520, D: 1.53745503503857E-10 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Hub, Func : CheckAnomalies 21:07:28 (1128) Is Empty, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 13/17: PosIndex: 12, ID: LVE-430, D: 3.5 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Rally Point, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Rally Point, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 14/17: PosIndex: 13, ID: WUQ-858, D: 35.37 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Port, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Port, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 15/17: PosIndex: 14, ID: IVE-428, D: 3.08 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Hidden Rally Point, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Hidden Rally Point, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 16/17: PosIndex: 15, ID: MVE-764, D: 31.47 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Hidden Den, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Hidden Den, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:28 (1128) Scan Result: 17/17: PosIndex: 16, ID: RVE-434, D: 4.73 AU, ScanGroup: Cosmic Anomaly, Group: Combat Site, Name: Angel Forlorn Hub, Func : CheckAnomalies 21:07:28 (1128) Checking keywords (1) :, Func : CheckAnomalies 21:07:28 (1128) |Angel Hub|, Func : CheckAnomalies 21:07:28 (1128) Anomaly name: Angel Forlorn Hub, Func : CheckAnomalies 21:07:28 (1128) Is Wrong Keyword, next..., Func : CheckAnomalies 21:07:32 (1131) No scan results were detected or anomalies bookmarked. Code 1, Func : CheckAnomalies 21:07:32 (1131) SS: C:\Users\Ололо\AppData\Local\MacroLab\Eve Pilot\ErrorHandler\EVEPilot-6.3.13.0-ScreenCheckAnomaliesCode1-2013-09-19_21-07-32.bmp, Func : CheckAnomalies ---> 21:07:32: ExitCode 1. Method consumed 60 sec. in 2 runs (average 30 secs/run), Next Line: 620+ ---> Desc: Returns 1 if work in anomalies enabled, but no anomalies left to work with 21:07:32: DockingToStation(620) 21:07:32 (1131) Region: Station Space Check, Func : DockingToStation 21:07:32 (1131) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:07:32 (1131) Region: Preset Check and Correction, Func : DockingToStation 21:07:32 (1131) Region: Sorting Order Update And Selected Item Window Check, Func : DockingToStation 21:07:32 (1131) Region: Overview Scan, Func : DockingToStation 21:07:32 (1131) Region: First line check, Func : DockingToStation 21:07:32 (1131) Failed to read distance in the first line, Func : DockingToStation 21:07:32 (1131) Docking start time is 0, assuming docking already started using jump then dock scheme. Code 2, Func : DockingToStation ---> 21:07:32: ExitCode 2. Method consumed 0 sec. in 2 runs (average 0 secs/run), Next Line: 620 ---> Desc: Returns 2 if in approach range from station/POS and approaching or during docking. Loop to the same line to wait while approaching completes to switch to docking phase 21:07:32: DockingToStation(620) 21:07:33 (1132) Region: Station Space Check, Func : DockingToStation 21:07:33 (1132) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:07:33 (1132) Region: Preset Check and Correction, Func : DockingToStation 21:07:33 (1132) Region: Sorting Order Update And Selected Item Window Check, Func : DockingToStation 21:07:33 (1132) Region: Overview Scan, Func : DockingToStation 21:07:33 (1132) Region: First line check, Func : DockingToStation 21:07:33 (1132) Failed to read distance in the first line, Func : DockingToStation 21:07:34 (1133) Overview not detected or numbers/icon not scanned but dock started. Code 2, Func : DockingToStation ---> 21:07:34: ExitCode 2. Method consumed 2 sec. in 3 runs (average 0 secs/run), Next Line: 620 ---> Desc: Returns 2 if in approach range from station/POS and approaching or during docking. Loop to the same line to wait while approaching completes to switch to docking phase 21:07:34: DockingToStation(620) 21:07:34 (1133) Region: Station Space Check, Func : DockingToStation 21:07:34 (1133) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:07:34 (1133) Region: Preset Check and Correction, Func : DockingToStation 21:07:34 (1133) Region: Sorting Order Update And Selected Item Window Check, Func : DockingToStation 21:07:34 (1134) Region: Overview Scan, Func : DockingToStation 21:07:34 (1134) Region: First line check, Func : DockingToStation 21:07:34 (1134) Failed to read distance in the first line, Func : DockingToStation 21:07:35 (1134) Overview not detected or numbers/icon not scanned but dock started. Code 2, Func : DockingToStation ---> 21:07:35: ExitCode 2. Method consumed 3 sec. in 4 runs (average 0 secs/run), Next Line: 620 ---> Desc: Returns 2 if in approach range from station/POS and approaching or during docking. Loop to the same line to wait while approaching completes to switch to docking phase 21:07:35: DockingToStation(620) 21:07:35 (1134) Region: Station Space Check, Func : DockingToStation 21:07:35 (1134) Warp not detected/finished. Code 2, Func : WarpingSubStop 21:07:35 (1134) Region: Preset Check and Correction, Func : DockingToStation 21:07:35 (1135) Region: Sorting Order Update And Selected Item Window Check, Func : DockingToStation 21:07:36 (1135) Region: Overview Scan, Func : DockingToStation 21:07:36 (1135) Region: First line check, Func : DockingToStation 21:07:36 (1135) Failed to read distance in the first line, Func : DockingToStation 21:07:36 (1135) Overview not detected or numbers/icon not scanned but dock started. Code 2, Func : DockingToStation ---> 21:07:36: ExitCode 2. Method consumed 4 sec. in 5 runs (average 0 secs/run), Next Line: 620 ---> Desc: Returns 2 if in approach range from station/POS and approaching or during docking. Loop to the same line to wait while approaching completes to switch to docking phase 21:07:36: DockingToStation(620)