The Deliverer is the second, built-in, algorithm added to EVEPilot. The Deliverer can transport your items from one station to another using station bookmarks (the top bookmark in the people and places window). To use the Deliverer you must complete a first run, unless you have already completed a first run on this client for the miner. You must select 'Deliverer' for the client on the front page as shown:

The Deliverer uses the same 'Traveling Settings/Deliverer Addon Settings' as the miner:

• 'Return to home system on start/DT' should be checked if you want the Deliverer to repeat your tasks on startup. Otherwise the Deliverer will continue to transport items from the last known position. Another way to force the Deliverer to start from the home system is to edit traveling route.
• 'Traveling conditions' can be ignored as they are only for the miner.
• 'Enter New System Name' is used to enter new commands for the deliverer.

Commands Table:

Description	Example Command
To load all items in System1 to the cargohold add the command: Tip: Replace System1 with real system name	System1>
To unload all items from the cargohold into System2's hanger use:	System2<
To haul all items from System1 to System2 you need to add two commands:	System1> System2<
To specify the name of an item you want to haul, you need to add the name to the command:	System1>Veldspar System2<
To specify the name and quantity of the item you want to haul, add the name#quantity command:	System1>Veldspar#1000 System2<
To haul 1000 Veldspar and drop 500 in System2 and all other items (not just veldspar) into System3 use:	System1>Veldspar#1000 System2<Veldspar#500 System3<
To haul several items from system 1 to system 2 use commands: Tip: this command will pick up all 3 types of Veldspar (regular, concentrated and dense) if present as well as Tritanium and haul the cargo to System2. Tip2: Hide your Veldspar Mining Crystals in a station warehouse because it also has the word 'veldspar' in the name and can be dragged to the ships cargohold along with the other Veldspar.	System1>Veldspar>Veldspar>Veldspar>Tritanium System2<
Visit System1 but don't do anything here:	System1^
Example: Pickup 1,000 units of Veldspar Mining Crystals, 10,000 of Coolant and 5,000 of Robotics from Jita. Haul it to Josameto and unload 500 units of Veldspar Mining Crystals and 5000 units of Coolant and all of the Robotics. Haul and unload the rest cargo in Poinen. Return and dock to station in Jita.	Jita>Veldspar M#1000>Coolant#10000>Robotics#5000 Josameto<Veldspar M#500<Coolant#5000<Robotics Poinen< Jita^

• Use the 'Add', 'Del', 'Up' and 'Down' buttons to reorganize the commands.
• Use the 'Load' and 'Save' buttons to load and save the list of deliverer tasks to file.
• The 'Clear' button will erase the travelling route and commands.
• You can limit the amount of cargo loaded into the cargohold of the ship by entering a figure into 'dont load cargo if cargohold'.
• After the Deliverer has finished the last command, EVEPilot will log the client off. To repeat the tasks continually, check the 'Cycle Systems' checkbox. This way the Deliverer will have to be stopped manually.
• Please make sure that you do not have any active modules set to activate at 100% when using the Deliverer. EVEPilot will attempt to activate these modules while cloaked after jumping through a gate. Also switch off the jamming NPC setting in the fight module.

If you use deliverer and miner at the same time, please check that using ore hold is disabled when you start deliverer.